I have about 5 named phones that are in the memory of my Freely. One is mine, one is the wife's and all others are previous owners. Every time we set up our own phone, we have to scroll through the others to get to ours. How do I delete the ones entered by the previous owner so that we just have the two phones in the memory? Past: FL2 TD4 HSE Auto
Evoque SD4 Dynamic Lux Auto
Present: Audi A3 S Line.

I'd only be repeating what's in the owners manual, if you haven't a hard copy of the manual then you can look it up on 'Topix'

It's not a very intuitive operation. If I remember well, first you have to select from the bluetooth menu, the phone that you want to delete, by pressing the rotating button and then by rotating the same button again you will see the option to delete that phone. The delete option is a part of the phone's menu that you want to delete.

As EY says, it's all in the handbook. In case you do not have one, this is what it states.

REMOVING A TELEPHONE FROM THE
SYSTEM
1. Select the telephone main menu.
See BLUETOOTH SETUP (page 9.
2. Select Bluetooth, then select the option to
remove a telephone.
3. Select a telephone by rotating the ENTER
button, highlight the telephone to be
removed then press the ENTER button. A
confirmation message to remove a
telephone will appear on the audio unit
display, press the ENTER button.
4. The remove telephone screen will be
displayed, and if no further telephones are
to be removed, press the EXIT button.

EYorkshire wrote:

I'd only be repeating what's in the owners manual, if you haven't a hard copy of the manual then you can look it up on 'Topix'

Thanks EYorkshire, atlas and wizking. I have got a hard copy. Read that and missed it. Just found it on TOPIx!  Past: FL2 TD4 HSE Auto
Evoque SD4 Dynamic Lux Auto
Present: Audi A3 S Line.