Hi
Sorry to be thick but how did you remove the sensor. I have tried squeezing the sides and using a flat knife to find the clips but have not been too brutal as I do not want to brake the plastic. So wants the trick please.

Tried mine yesterday and it did not work, I pulled my down and pushed the connector in fully and by magic it now works, god knows how it would come loose?
georgetina just grab both sides and pull hard it will spring out

I recently bought my 2010 XS Freelander 2 and joined this forum to see what I could learn.

I am really glad I did as on reading about the number of folk who have found the volumetric alarms not working on their cars I went out and tried mine and yep - mine didn't work either.

I may never have thought to test it and clearly the previous owner hadn't either. I followed the guidance here, though pulling the sensor unit off the roof was a tad nerve wracking, removed the green plug, re-inserted firmly and tested again. This time it worked just fine so would like to say a big thank you to those who posted the problem and the fix.

I am left wondering now just how many Freelander2's owners are diligently "fully" setting their alarms as they leave their cars believing all parts of the system are on when in fact the volumetric system is inactive. A brick through a window would not set the system off!!

Just tried this and couldn't get the alarm to trigger until after unplugging the green connection and reconnecting. How strange!

Thanks for the tip folks.

I too had an alarm that wouldn't sound, and thanks to this thread it now works as expected

Found lots of dried leaves and debris in there!

Well glad It save you ���� than going to the dealers

Thanks for info yet again this forum is very helpful Didn't even think to check the alarm sensors but now its all working

Cheers guys

Daniel

Just found this thread, mine doesn't work either

Going to try mine now! ..

It didn't work, pulled it off , unclipped & reclipped green plug , it works now ! ...

Same here
It didn't work, pulled alarm sensor from roof , removed green plug ,plugged back in it works now.

Tried mine. Surprise surprise, didn't work.

Replugging fixed it. Andy
Freelander2 HSE (59 Plate, MY10 spec)

Umplugged the green plug but unfortuantley it did not work for me  Freelander 2 TD4 GS 2011 Manual Satorini Black (Current)
Freelander TD4 S 2004 Silver Manual (Gone)
Landrover Series 3 Manual Long Wheel Base Safari (Gone)
Landrover series 2A Manual Short Wheel Base (Gone)
Numerous different vehicles inbetween

I went out and checked my alarm sensor and mine wasn't working too unplugged green socket now the sensor works.
I also got some strange looks from my neighbour when I locked my self in the car.
The alarm sensors seams to only activate when you double lock.

Yes, the alarm only sets on double locking, this is so you can lock a dog or similar in the vehicle, if it set the alarm the dog moves the alarm would activate.

Before anyone jumps on this, I do not suggest you lock a dog in the car in hot weather with windows closed. p****d off with a Digital Keyboard Warrior