![]() |
|
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > Technical > oil leak at 8000mls !! |
![]() ![]() |
|
|
iain cooper Member Since: 27 Aug 2007 Location: north of Glasgow Posts: 1989 ![]() ![]() ![]() |
unfortunately I have an oil leak which revealed itself leaving spots at various places on my nice new monoblock driveway. ( something else I'll need to deal with, ideas appreciated )
|
||
![]() |
|
tonyjones1968 Member Since: 10 Sep 2007 Location: doncaster Posts: 94 ![]() ![]() ![]() |
Mine was in that spot too,had my intake hose to turbo replaced twice now!! found leak on services,not bad enough to drip though,but hose joint to steering rack proper |
||
![]() |
|
iain cooper Member Since: 27 Aug 2007 Location: north of Glasgow Posts: 1989 ![]() ![]() ![]() |
thanks for your replies and tips on cleaning my monoblock driveway.
|
||
![]() |
|
chicken george Member Since: 06 Dec 2007 Location: N. Yorks Posts: 13292 ![]() ![]() ![]() |
![]() ![]() ![]() At home ![]() "I can't always believe facts I read on the web" - Charles Dickens winner by default of the tractor vs caravan race |
||
![]() |
|
iain cooper Member Since: 27 Aug 2007 Location: north of Glasgow Posts: 1989 ![]() ![]() ![]() |
yes CG tornado red, three door, just over 80,000 mls, not up for sale at the moment, but I will let you know !!
|
||
![]() |
|
Udash Member Since: 23 Apr 2009 Location: manchester Posts: 195 ![]() ![]() ![]() |
Based on where you think the oil is coming from it looks like its same as mine, I noticed bit of oil leak before 6 months and got the dealer to fix it so luckily didn’t get spills on the garage floor. Oil leak was from the crank case ventilation hose and where it connects to the cylinder head cover. Actual hose is rubber but it seems to be having a sharp bend and it’s fixed with a crimp type hose clip. (red circle area)
|
||
![]() |
|
iain cooper Member Since: 27 Aug 2007 Location: north of Glasgow Posts: 1989 ![]() ![]() ![]() |
thanks very much Udash for the diagram, and yes I think it is from this area mine is leaking.
|
||
![]() |
|
Udash Member Since: 23 Apr 2009 Location: manchester Posts: 195 ![]() ![]() ![]() |
I identified the leak and also showed them the diagram above, they only spent around 30 min, have not fitted a new hose, they have just tighten the hose clip a little bit. I can still see slight oiliness but no leaks. Also they didn’t clean the leaked oil as I expected so I ended up wiping off and cleaning up. Poor service. If I get a leak again will insist on a new hose. Like you they said that I have to wait few weeks to get a replacement car.
|
||
![]() |
|
iain cooper Member Since: 27 Aug 2007 Location: north of Glasgow Posts: 1989 ![]() ![]() ![]() |
thanks Udash, I managed to get my engine cover off ok ( there's a small nut you can undo and it separates the cover from the air intake ) and am pretty sure it's the same problem as you had.
|
||
![]() |
|
Udash Member Since: 23 Apr 2009 Location: manchester Posts: 195 ![]() ![]() ![]() |
I think the clamp used don’t work well, maybe solution would be to replace it with a standard screw type clamp. Also what I noticed is that there are lots of small crevices around this place and oil pools in them cleaning very difficult. Freelander 2 TD4 HSE Auto
|
||
![]() |
|
iain cooper Member Since: 27 Aug 2007 Location: north of Glasgow Posts: 1989 ![]() ![]() ![]() |
I wonder if there is a workshop instruction for this repair ?
|
||
![]() |
|
phillm03 Member Since: 03 Jun 2009 Location: West Sussex Posts: 19 ![]() ![]() ![]() |
Just got mine back after its first service and they said they had carried out a warranty repair on a small oil pipe that was leaking slightly - not enough for me to have noticed but they said they had cleaned away the oil from the pan - so this might b a common issue.
|
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
