I've bought a full Dog Guard/Cargo Barrier off eBay - the guy was very honest and told me there were two brackets missing so now I need to source them of get some made up.

I just need the two small _/¯ shaped brackets that fit at the bottom of the guard after removing the hold down rings, the hold down rings then fix to these small brackets along with longer flat extension brackets that go to the bottom mounts of the guard.

If anyone has a pair of these, can tell me where I can get them or can measure the one they have and send me a little sketch so that I can make a pair I'd really appretiate your help - and beer tokens will be exchanged

Regards
Bob Jeffries[/code]

Try contacting Nick Lee (parts Manager) at Yeovil Landrover

he forum member 'the large one' if its availible he be able to get it for you, just mention the forum

Nick  Former Mod/Member, with the most post & Chicken George Arch nemesis

Thanks Nick, I'll see what he can do.

Regards
Bob Jeffries

If not I have the guard and might be able the sketch the parts or show you them if your local to Leeds Former Mod/Member, with the most post & Chicken George Arch nemesis

A rough sketch with approximate sizes would do Nick, the actual sizes & shape don't look critical, a bent bit of 12.5mm wide x 3mm thick steel will probably be OK - I have rivnuts & an insertion tool to add the threaded boss. I'd be grateful for anything you can get me.

Regards
Bob Jeffries