Couple of queries:

I had roof bars professionally fitted and was disappointed to see them so close together - the rear one is less than a metre from the front. Is there an option to move the rear one more towards the back? I presume there must be a mounting point there for the roof rails.
Also, what is the go-to solution for getting a second key fob for a 2014 TD4 in Aus?

TIA

Steve

I think you will need to knock up a custom bracket to mount on the rear mounting position.

Just pull up the black plastic strip & compare with the other mounting position.

See post #43:
https://www.4x4community.co.za/forum/showt...mods/page3 Procrastination, mankind's greatest labour saving device!

Acoustic insulation ARB TPMS 3xARB air compressors After cooler Air tank On-board OCD pressure air/water cleaning Additional 50L fuel Carpet in doors ABE 2x1kg Waeco 28L modified fridge Battery 4x26ah Solar 120w Victron MPPT 100/20 DC-DC 18amps 175amp jumper plug Awning 6x255/60R18

I had a look at my car as best as I could. Everything is bolted on for corrugated roads.

Your roof rack bars are fitted to the correct position.

There are another 3 positions for roof rail's front, centre & rear bolts into the roof. So you could utilise these with a custom bracket.

I noticed on the internet one of the roof platform set-ups is using the 4 rear mounting positions (not the one at the very front, for the roof rails).

Using the Land Rover roof rails you can have a cross bar spacing of 1135mm (centre to centre). Mine are a little over at 1170mm but 85% of the cross bar clamp is still on the rail's aluminium extrusion. Also I am using 4 cross bars. But each of the 2 cross bars are solid as can be.

https://www.freel2.com/forum/topic35376.html Procrastination, mankind's greatest labour saving device!

Acoustic insulation ARB TPMS 3xARB air compressors After cooler Air tank On-board OCD pressure air/water cleaning Additional 50L fuel Carpet in doors ABE 2x1kg Waeco 28L modified fridge Battery 4x26ah Solar 120w Victron MPPT 100/20 DC-DC 18amps 175amp jumper plug Awning 6x255/60R18