Need to replace outer weather seal drivers front door, do I need to remove door card and mirror to remove and install replacement weather strip.

page 2238 and 2249 of freebie JLR manual

has little to say - lower the glass if possible , remove screw and lift out by the look of it.
Nothing about removing other stuff first.

Click image to enlarge

Thank you will have a look

Have replaced it with no fuss, just removed the small torx screw from inside the door lifted it up and pulled it out from under mirror and then replaced. No removing of door card or mirror really straight forward, happy days 😃

Steang, you say youv'e replaced it, what was the issue with the original one? DAVE.

From the pictures it was deforming at the edge.

Hi as in earlier pic, it had bubbling along it so thought it could be rust, turned out it was a build up of debris behind it causing it to deteriorate

Thanks for the reply Steang, as an ex D2 owner I thought it might have rotted out. DAVE.