Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Technical > Door lock motors |
|
|
IanMetro Member Since: 11 Sep 2017 Location: Somerset BS21 Posts: 3134 |
That picture ls from Jules Thread of Door Lock instructions, and I thought it illustrated how to squeeze and remove the white plug.
|
||
17th Aug 2024 3:41 pm |
|
Bogart Member Since: 20 May 2015 Location: Norfolk Posts: 526 |
Beats me how it shows it but anyway got it off well more like it popped off flew across the garage but retrieved it. What a dog's dinner it is in these all springs levers. Have fitted new motors and had enough for today, as he reaches for a bottle, |
||
17th Aug 2024 4:03 pm |
|
Bogart Member Since: 20 May 2015 Location: Norfolk Posts: 526 |
Right after huffing a puffing trying to put the gizmos together it works , sort of. The original problem was that after unlocking one could not open the door from the outside, never tried from inside. Now all seems okay unlocking and door opens from outside fine. It does not open if I use the internal handle after unlocking. Am I missing the obvious here? State it is in is that a passenger inside cannot open the door. |
||
18th Aug 2024 9:34 am |
|
Boxa Member Since: 01 Apr 2024 Location: Coventry Posts: 97 |
are the child locks on ? |
||
18th Aug 2024 11:00 am |
|
PRadd Member Since: 09 Apr 2020 Location: East Lancs Posts: 362 |
I know you got that white plastic arm off now, but for future reference and others browsing this thread - I used a small socket to squeeze the black plastic barbed retainer in the centre of the white plastic bit, once the black barbs are squeezed together, the white plastic fitting and socket just lift off. 2014 Freelander 2 TD4 Manual Dynamic
|
||
18th Aug 2024 11:10 am |
|
Bogart Member Since: 20 May 2015 Location: Norfolk Posts: 526 |
|
||
18th Aug 2024 11:19 am |
|
Bogart Member Since: 20 May 2015 Location: Norfolk Posts: 526 |
I did not have a thin enough sidewall socket. Of course after getting it off then found I had a load of metal expansion sockets that fit a treat. Sod's law. |
||
18th Aug 2024 11:21 am |
|
Bogart Member Since: 20 May 2015 Location: Norfolk Posts: 526 |
Finally got there. Took the whole thing apart again and put back together just as done before and hey bingo it works. Out of interest tested the larger motor on a battery and my never seen so much smoke out of a tiny motor.
|
||
18th Aug 2024 12:36 pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis