Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > General > Vehicle cranks and only goes to 500rpm
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
hamrat



Member Since: 24 Jul 2023
Location: Johannesburg
Posts: 3

South Africa 2008 Freelander 2 TD4 HSE Auto Nazca Sand
Vehicle cranks and only goes to 500rpm

I'm struggling with my TD4. When I go to start it she cranks and goes to about 500rpm and sits there with the starter still trying to crank and there is no accelerator response. No errors are generated. We've checked the pullies and she does it with or without the belt on.
Any ideas as to what it could be? I did replace the throttle body with a generic part in March. Could that be the problem? Air filter and intercooler are clear as well

Post #443240 12th Jul 2024 12:29 pm
View user's profile Send private message View poster's gallery Reply with quote
Nodge68



Member Since: 15 Jul 2020
Location: Newquay
Posts: 2082

United Kingdom 2009 Freelander 2 TD4 SE Manual Rimini Red

500 RPM suggests there's no compression. Normally these engines crank at about 250 to 300 RPM.
When was the timing belt last changed? Hyundai Ioniq 5 Ultimate. The family car.
2009 Rimini Red SE TD4. Gone.
2006 Tonga Green i6 HSE. Gone.
Audi A5 convertible, my daily driver.
1972 Hillman Avenger GT, the project.

Post #443245 12th Jul 2024 3:47 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site