Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Technical > 2013 FL2 Starting Problem |
|
|
Rommel Member Since: 20 Aug 2017 Location: Sandhurst Berkshire Posts: 646 |
How old is the battery? these are very sensitive to charge and voltage if the battery is tired it will give the symptoms you describe, could also be a bad earth, or tired starter, how many miles it done? will it start with a jump?
|
||
8th Jun 2024 5:14 pm |
|
BossBob Member Since: 30 Sep 2010 Location: Bristol Posts: 1401 |
Sounds as if the contacts in the starter solenoid have burnt out. You can replace the solenoid or if a bit handy you can buy a kit and just replace its internals. |
||
8th Jun 2024 6:51 pm |
|
Bob H Member Since: 04 May 2024 Location: Devon Posts: 4 |
Many thanks Rommel & BossBob for your advice.
|
||
9th Jun 2024 2:01 pm |
|
O-B-Wan003 Member Since: 12 Sep 2017 Location: county Down Posts: 127 |
Bob, I had a very similar experience and turned out to be the contacts in the starter. You can be the kit online and it’s very simple to do. Kit cost around £20 rather than a couple of hundred for a new starter. |
||
10th Jun 2024 5:10 pm |
|
Drayman Member Since: 20 May 2018 Location: Barnsley Posts: 13 |
I’m having the same problem as Bob.
|
||
26th Jun 2024 5:03 pm |
|
Freddy Flip Flop Member Since: 27 Jun 2024 Location: Surrey Posts: 1 |
Hi Bob H, I have a 2009 TD4 HSE which I have owned for 8 years and has been really reliable. I have had starting issues where pressing the starter button it might turn a little, stop, turn a little more and finally start. When it turns properly it always starts promptly. Been to 2 specialists who haven’t pinpointed the problem. One suggested the starter button was faulty but replacing needs coding to the engine/ECU needing full LR workshop equipment which they don’t have. Battery replaced a couple of years ago and no other electrical issues. Any help welcome!! |
||
27th Jun 2024 6:02 am |
|
PRadd Member Since: 09 Apr 2020 Location: East Lancs Posts: 366 |
Have you changed the keyfob battery yet? 2014 Freelander 2 TD4 Manual Dynamic 1956/7 88" Series One Land Rover 1956/7 88" Series One Land Rover - undergoing restoration |
||
27th Jun 2024 7:11 am |
|
IanMetro Member Since: 11 Sep 2017 Location: Somerset BS21 Posts: 3156 |
[quote="Freddy Flip Flop"]Hi Bob H, I have a 2009 TD4 HSE which I have owned for 8 years and has been really reliable. I have had starting issues where pressing the starter button it might turn a little, stop, turn a little more and finally start. When it turns properly it always starts promptly. Been to 2 specialists who haven’t pinpointed the problem. One suggested the starter button was faulty but replacing needs coding to the engine/ECU needing full LR workshop equipment which they don’t have. Battery replaced a couple of years ago and no other electrical issues. Any help welcome!![/quote
|
||||
27th Jun 2024 8:55 am |
|
IanMetro Member Since: 11 Sep 2017 Location: Somerset BS21 Posts: 3156 |
Is it the same with both Fobs? I would change Fob battery anyway as a precaution, although you say unlocking works normally, and only the 'Near Field' function appears to be faulty. FL2 XS SD4 Auto 2010 2012-2017 (21k - 91k miles) (MY2011) FL2 Metropolis SD4 Auto 2014 2017- (16k - 77k+ miles) (MY2015) Metro in its 11th Year of (Extended) LR Warranty / Full LR Service History (Expensive, but Trouble/Worry free - hopefully?) Last edited by IanMetro on 27th Jun 2024 3:40 pm. Edited 1 time in total |
||
27th Jun 2024 9:00 am |
|
Drayman Member Since: 20 May 2018 Location: Barnsley Posts: 13 |
Yes in both. Maker of fine writing instruments.🖊🖌🖋 |
||
27th Jun 2024 9:44 am |
|
Lightwater Member Since: 21 Aug 2014 Location: Sydney Northern Beaches Posts: 4907 |
I don't bother changing the fob battery. My mechanic for the last number of years replaces "all" fob batteries. $8.00. On one hand a bit expensive, but on the other, need to give him a few dollars. My only thinking task is to drop off to the mechanic alternative fob with car! Procrastination, mankind's greatest labour saving device!
|
||
27th Jun 2024 11:27 am |
|
little jimmy Member Since: 18 Jan 2024 Location: Hemel Hempstead Posts: 90 |
The starter motor bits are easy peasy to fit. Getting to the Three bolts to get the starter motor off are a pain, as they are behind the wiring loom which does not have a great deal of play. |
||
27th Jun 2024 5:19 pm |
|
IanMetro Member Since: 11 Sep 2017 Location: Somerset BS21 Posts: 3156 |
I only have the FL2 13-14 wiring and no explanation. But I have found this thread with a picture of the Immobilizer Antenna Unit which seems not to be working correctly by your description. I have no further information at the moment. https://landroverforums.com/forum/lr4-38/k...off-96921/ PS I found this thread where I was looking for the NF Antenna -- it looks like I didn't find it and therefore may have confused the RF 433MHz Antenna with the NF Antenna then. (the NF Ant is on page 92 of the 2013 Wiring Diagrams) Worth a look at this as it has an interesting video link explaining the locking system (but not the NF Immobilizer) https://www.freel2.com/forum/post430174.html FL2 XS SD4 Auto 2010 2012-2017 (21k - 91k miles) (MY2011) FL2 Metropolis SD4 Auto 2014 2017- (16k - 77k+ miles) (MY2015) Metro in its 11th Year of (Extended) LR Warranty / Full LR Service History (Expensive, but Trouble/Worry free - hopefully?) |
||
27th Jun 2024 6:14 pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis