Hello everyone

I was planning on revamping my 19" diamond cut alloys and had some others to use in the meantime. However the others gen LR wheels look very nice in black gloss and thinking of keeping them on. Now what would be best, revamp the originals to standard spec or have black glossed too? Would standard spec sell better than having them in black gloss? Or try and sell in their current sorry condition? Look forward to your thoughts. Thanks

Probably get less money if they are resprayed. Procrastination, mankind's greatest labour saving device!

Acoustic insulation ARB TPMS 3xARB air compressors After cooler Air tank On-board OCD pressure air/water cleaning Additional 50L fuel Carpet in doors ABE 2x1kg Waeco 28L modified fridge Battery 4x26ah Solar 120w Victron MPPT 100/20 DC-DC 18amps 175amp jumper plug Awning 6x255/60R18

mrbee wrote:

Hello everyone

I was planning on revamping my 19" diamond cut alloys and had some others to use in the meantime. However the others gen LR wheels look very nice in black gloss and thinking of keeping them on. Now what would be best, revamp the originals to standard spec or have black glossed too? Would standard spec sell better than having them in black gloss? Or try and sell in their current sorry condition? Look forward to your thoughts. Thanks

Diamond cut wheels are extremely expensive to refurbish from what I've heard.
You'd be better off just selling them as is.
Years ago, around 2005 , I had a very desirable set of alloys for my Freelander 1. I had just put brand new A/T tyres on them but decided to sell them as I had also bought some M-Sport Oz Racing wheels that I'd had refurbished and put new tyres on and liked them better.
Anyway, the wheels were going for around £400 - 500 for bare rims at the time, the new tyres about £3-400. But I only got £250 for them because people didn't want them with A/T tyres, so I didn't get many bids. I would have been better off removing the tyres from the rims and selling both separately.
So, painting your wheels is just an expense you don't need and won't recoup back, or help them sell for any more. Let the buyer make that decision and save some time and expense.

Many thanks for your time and suggestions. I wonder if anyone here would be interested?

The steering lock does cause non starting problems I as many have have fitted an emulator maybe worth a try removing the lower shroud and hitting the actual lock a few heafty knocks with a hammer and screw driver,having said that it’s usually combined with clicking in the passenger footwell.

mrbee wrote:

Many thanks for your time and suggestions. I wonder if anyone here would be interested?

mrbee wrote:

Hello everyone

I was planning on revamping my 19" diamond cut alloys and had some others to use in the meantime. However the others gen LR wheels look very nice in black gloss and thinking of keeping them on. Now what would be best, revamp the originals to standard spec or have black glossed too? Would standard spec sell better than having them in black gloss? Or try and sell in their current sorry condition? Look forward to your thoughts. Thanks