Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Technical > Oil all over (I think) manifold to intercooler 2.2 diesel
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
dirtypaws



Member Since: 03 Sep 2015
Location: yorkshire
Posts: 10

United Kingdom 
Oil all over (I think) manifold to intercooler 2.2 diesel

Hi, I have done some research and I think it's the manifold to intercooler pipe, it is covered in oil (more so on the engine side of the pipe). It is secured by jubliee clips (2 at the top and 1 down the bottom).

Is this the source of the oil or could it be coming from elsewhere? I have read these pipes split is it something I can change myself if it needs changing.

I have some issues with my car, the revs kinda bounce when accelerating at 2k rpm they bounce up by about 500 before coming back down, also the cabin seems to rumble and vibrate at like 50mpg +, is this all connected?

I will try and add a picture of the pipe in question, just today I tightened the jubilee clips (top 2) but the pipe is kinda soft so I imagine I could really tighten them up and crush the pipe?

Click image to enlarge

it is a 2011 2.2 Freelander 2.

Best regards[/img]

Post #438726 23rd Jan 2024 8:12 pm
View user's profile Send private message View poster's gallery Reply with quote
Nodge68



Member Since: 15 Jul 2020
Location: Newquay
Posts: 2082

United Kingdom 2009 Freelander 2 TD4 SE Manual Rimini Red

The hoses are more likely to split than come loose.
It's best to just replace any suspicious hoses, but at over 10 years old, they could all do with replacing.

Oh and hoses should have 1 clip on each end, not 2. So something isn't right there. Hyundai Ioniq 5 Ultimate. The family car.
2009 Rimini Red SE TD4. Gone.
2006 Tonga Green i6 HSE. Gone.
Audi A5 convertible, my daily driver.
1972 Hillman Avenger GT, the project.

Post #438730 23rd Jan 2024 9:01 pm
View user's profile Send private message View poster's gallery Reply with quote
Grue



Member Since: 29 Apr 2018
Location: New Zealand
Posts: 366

New Zealand 2007 Freelander 2 TD4 SE Auto Sumatra Black

You'll be swearing a lot when you do it as access is tight, but yeah, definitely DIY-able.

Like Nodge said, just replace them, pretty sure you'll find a split.

Post #438733 23rd Jan 2024 10:58 pm
View user's profile Send private message View poster's gallery Reply with quote
NeilTD4



Member Since: 21 May 2018
Location: Warwickshire
Posts: 165

England 2011 Freelander 2 SD4 HSE Auto Lago Grey

Click image to enlarge


I replaced mine back along, it hadn't split, but it was definately past its best...

The replacement is a silicone one.

Post #438771 24th Jan 2024 7:33 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site