Freel2.com - View topic - P0916-33 error code


Forum-Gallery-Shop-Sponsors « Advertise on Freel2.com

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > P0916-33 error code

Page 1 of 1

Print this entire topic ·

Superted_holty

Member Since: 18 Jan 2024
Location: Chesterfield
Posts: 3

2010 Freelander 2 TD4 SE Manual Orkney Grey

P0916-33 error code

Bought a obd reader for my FL2 and these two error codes keep popping up. Are they anything serious or easy to repair?
It's a 2010 manual 2.2 diesel[/quote]

18th Jan 2024 5:23 pm

BossBob

Member Since: 30 Sep 2010
Location: Bristol
Posts: 1436

2007 Freelander 2 TD4 GS Manual Baltic Blue

Why not look it up for yourself. Just put the code into your favourite search engine! Then if you can’t work it out, come back and ask. You’ll get a better response if it looks as if you tried before using us as a help desk!

18th Jan 2024 5:46 pm

robblue

Member Since: 10 Jan 2017
Location: cornwall
Posts: 269

2012 Freelander 2 SD4 XS Auto Santorini Black

2009 FL2 S now gone
2011 FL2 HSE AUTO
2012 FL2 XS AUTO
2000 Kawasaki er 5

18th Jan 2024 7:07 pm

jules

Member Since: 13 Dec 2007
Location: The Wilds of Warwickshire
Posts: 5148

2014 Freelander 2 SD4 SE Auto Firenze Red

Re: P0916-33 error code

Superted_holty wrote:
Bought a obd reader for my FL2 and these two error codes keep popping up. Are they anything serious or easy to repair?
It's a 2010 manual 2.2 diesel

[/quote]

P0961 Pressure control solenoid A control - circuit range/performance

sub code
33 - Frequency modulation/pulse width modulation failure - signal low time>maximum

You now know as much as I do. Jules

18th Jan 2024 10:47 pm

Superted_holty

Member Since: 18 Jan 2024
Location: Chesterfield
Posts: 3

I did exactly that and Google gave multiple answers for the same code.

One section even said post it on freel2.com as the guys there should know....

So I did exactly that.

It actually reads gear position sensor low.

So I wanted to know if this creates any stress on the engine that could cause issues.

If not, is it an easy fix? I'm guessing there's issues with the circuit... But where is it located so I can test continuity?

19th Jan 2024 7:52 am

Superted_holty

Member Since: 18 Jan 2024
Location: Chesterfield
Posts: 3

Re: P0916-33 error code

jules wrote:
Superted_holty wrote:
Bought a obd reader for my FL2 and these two error codes keep popping up. Are they anything serious or easy to repair?
It's a 2010 manual 2.2 diesel

P0961 Pressure control solenoid A control - circuit range/performance

sub code
33 - Frequency modulation/pulse width modulation failure - signal low time>maximum

You now know as much as I do.[/quote]

Wrong code read my title

19th Jan 2024 7:53 am

jules

Member Since: 13 Dec 2007
Location: The Wilds of Warwickshire
Posts: 5148

oops sorry - I misread it.

My list of FL2 codes says

P0916 Gearshift position - circuit low

Why would need to know gear lever position on a manual gearbox ?

Reverse gear protection ??? Im guessing Jules

19th Jan 2024 11:32 am

Dean1234

Member Since: 18 Jan 2022
Location: Northamptonshire
Posts: 232

2010 Freelander 2 TD4_e XS Manual Biscay Blue

Jules. With it being a 2010 Freelander 2, it could have start/stop on it. I know on ours it also has the nag light on the dash telling me when it thinks it's best to change up. Maybe it needs to know what gear it's in for that or for the stop/start in general? https://www.youtube.com/@scottandalana4x4

19th Jan 2024 4:14 pm

Badger51

Member Since: 01 Mar 2014
Location: Coffs Harbour
Posts: 984

BossBob wrote:
Why not look it up for yourself. Just put the code into your favourite search engine! Then if you can’t work it out, come back and ask. You’ll get a better response if it looks as if you tried before using us as a help desk!

Why bother when it’s all readily available on here?

https://www.freel2.com/forum/topic17379.html (Now Sold). 2008 Freelander 2 (Nazca Sand) SE TD4 Auto. Statutory write off & on WOVR for hail damage but still road legal.
171037Km as of 09/05/22
Superchips Bluefin Flash
Nanocom Evo II (also sold)

19th Jan 2024 9:32 pm

jules

Member Since: 13 Dec 2007
Location: The Wilds of Warwickshire
Posts: 5148

Dean1234 wrote:
Jules. With it being a 2010 Freelander 2, it could have start/stop on it. I know on ours it also has the nag light on the dash telling me when it thinks it's best to change up. Maybe it needs to know what gear it's in for that or for the stop/start in general?

Good point

None of my three FL2s have had stop/start - it just didnt occur to me. Jules

19th Jan 2024 10:28 pm

Nodge68

Member Since: 15 Jul 2020
Location: Newquay
Posts: 2086

2009 Freelander 2 TD4 SE Manual Rimini Red

I'm guessing it's one of those random codes left over from development that was never removed from the system.

Another thought is that the ECM has been replaced by one from an auto, but hasn't been fully configured to a manual vehicle.

A manual shouldn't need to know the current gear, as the ECM can calculate the current gear from a simple calculation between the engine speed and road speed.
On 1st and reverse gears need actual switches, so the HDC can be sure as to whether to all HDC to function or not. Hyundai Ioniq 5 Ultimate. The family car.
2009 Rimini Red SE TD4. Gone.
2006 Tonga Green i6 HSE. Gone.
Audi A5 convertible, my daily driver.
1972 Hillman Avenger GT, the project.

20th Jan 2024 6:40 am

Page 1 of 1

All times are GMT

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum