Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com
Home > Advanced Factors > Front hub bearing and upright
Post Reply  Down to end
Page 2 of 2 <12
Print this entire topic · 
I Like Chips



Member Since: 25 Jun 2017
Location: Ascott Under Wychwood
Posts: 1545
United Kingdom 2011 Freelander 2 SD4 HSE Auto Indus Silver

Front LH Complete new old stock or is it old new stock. Just the one


https://www.ebay.co.uk/itm/225129557634?ha...SwKfVXIg8u
Post #424648 26th Aug 2022 10:50 am
View user's profile Send private message View poster's gallery Reply with quote
jules



Member Since: 13 Dec 2007
Location: The Wilds of Warwickshire
Posts: 5061
United Kingdom 2014 Freelander 2 SD4 SE Auto Firenze Red

Sorry to offend the DIYers on here (inc myself) Laughing , but in the end because Ive got so little free time this week and then Im off on holiday, I took it to my local garage who replaced the bearing this morning.
£216 inc labour & parts (pressed in a new hub - "took 13 tonnes")

I had previously confirmed the fault by jacking the front wheels up and disabled the haldex by pulling the fuse, and feeling the excess vibration in the coil spring whilst SWMBO drove an indicated 40mph. Jules
Post #424653 26th Aug 2022 3:16 pm
View user's profile Send private message View poster's gallery Reply with quote
jules



Member Since: 13 Dec 2007
Location: The Wilds of Warwickshire
Posts: 5061
United Kingdom 2014 Freelander 2 SD4 SE Auto Firenze Red

I Like Chips wrote:
Front LH Complete new old stock or is it old new stock. Just the one


https://www.ebay.co.uk/itm/225129557634?ha...SwKfVXIg8u



Saw that - nearly bought it Jules
Post #424654 26th Aug 2022 3:17 pm
View user's profile Send private message View poster's gallery Reply with quote
I Like Chips



Member Since: 25 Jun 2017
Location: Ascott Under Wychwood
Posts: 1545
United Kingdom 2011 Freelander 2 SD4 HSE Auto Indus Silver

I bought a front set of these from this seller and put them on. Don't know why you can't get the complete backs too

Jules I don't blame you, it's Ok if you have the kit and time to do it.
Post #424655 26th Aug 2022 4:30 pm
View user's profile Send private message View poster's gallery Reply with quote
jules



Member Since: 13 Dec 2007
Location: The Wilds of Warwickshire
Posts: 5061
United Kingdom 2014 Freelander 2 SD4 SE Auto Firenze Red

Normally I'd give it a go but events have conspired against me. Jules
Post #424658 26th Aug 2022 9:01 pm
View user's profile Send private message View poster's gallery Reply with quote
Bobupndown



Member Since: 26 Dec 2014
Location: Upside down behind the TV!
Posts: 2816
United Kingdom 2014 Freelander 2 SD4 GS Auto Orkney Grey

If it was for the drivers side I'd snap that up. Weirdly mine has stopped making any noise again. Landrover - turning owners into mechanics since 1948

2014 Orkney grey Freelander SD4 GS.
2004 Zambezi silver Discovery 2 Td5 (Gone)
1963 Surf blue Morris Mini Minor Super de Luxe (my little toy)
Post #424667 27th Aug 2022 8:37 am
View user's profile Send private message View poster's gallery Reply with quote
jules



Member Since: 13 Dec 2007
Location: The Wilds of Warwickshire
Posts: 5061
United Kingdom 2014 Freelander 2 SD4 SE Auto Firenze Red

The bearing had been slowly becoming more noisy for so long that I had forgotten how quiet the car was before - like having a new car again. Jules
Post #424670 27th Aug 2022 10:10 am
View user's profile Send private message View poster's gallery Reply with quote
I Like Chips



Member Since: 25 Jun 2017
Location: Ascott Under Wychwood
Posts: 1545
United Kingdom 2011 Freelander 2 SD4 HSE Auto Indus Silver

Bobupndown wrote:
If it was for the drivers side I'd snap that up. Weirdly mine has stopped making any noise again.


What like a painful tooth, As soon as you get to the dentist the pain disappears
Post #424692 27th Aug 2022 5:35 pm
View user's profile Send private message View poster's gallery Reply with quote
Farmer Chalk



Member Since: 07 Jul 2016
Location: Sevenoaks
Posts: 138
United Kingdom 2013 Freelander 2 SD4 Dynamic Auto Firenze Red

jules wrote:
You may want to consider also getting knuckle bolt LR000073 and drive shaft retainer bolt LR000577 from AF though. Not expensive.


Anyone doing this job needs to order the knuckle bolt.. this is the third one I have now done and every single one has sheared.. the reason is where the bolt is exposed where it goes through the two halves to pinch up the knuckle it is exposed to the elements and rusts and expands.., so as you are trying to draw the bolt back through one half it seizes then shears. This is despite trying to brush off as much surface rust but you can’t access it properly.
If you are not replacing the knuckle then make sure you have catered enough time to drill the old bolt out!
Post #432614 20th May 2023 11:01 pm
View user's profile Send private message View poster's gallery Reply with quote
Mowog



Member Since: 11 Apr 2018
Location: Cheshire
Posts: 503

Or take the precaution of heating up the knuckle and penetrating oil and crossed fingers
Post #437859 18th Dec 2023 10:36 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 2 of 2 <12
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site