Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Technical > MAF sensor - Calibration or Set Up? |
|
|
I Like Chips Member Since: 25 Jun 2017 Location: Ascott Under Wychwood Posts: 1546 |
Contact the garage tell them about your concerns and ask them if they fitted a genuine or a good oem MAF sensor or a cheapo copy also if they did an air path recalibration after fitting the MAF sensor. |
||
10th Dec 2023 11:02 am |
|
Nodge68 Member Since: 15 Jul 2020 Location: Newquay Posts: 2082 |
As said above.
|
||
10th Dec 2023 12:20 pm |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 5062 |
Its the same for fitting a replacement EGR valve - needs an air path calibration.
|
||
10th Dec 2023 2:30 pm |
|
I Like Chips Member Since: 25 Jun 2017 Location: Ascott Under Wychwood Posts: 1546 |
Again one of my three Code readers will do an air path recalibration but I can't remember which one, A guess says its the GAP. Next time I have them out I will check. If I remember |
||
10th Dec 2023 5:09 pm |
|
MotionInc Member Since: 17 Jun 2019 Location: North America Posts: 1358 |
Just curious...
|
||
10th Dec 2023 8:41 pm |
|
Nodge68 Member Since: 15 Jul 2020 Location: Newquay Posts: 2082 |
It's a turbo diesel thing. No need to worry on the 6 pot petrol. Hyundai Ioniq 5 Ultimate. The family car.
|
||
10th Dec 2023 10:52 pm |
|
sid Member Since: 16 Jul 2015 Location: devon Posts: 493 |
i think if you do a battery reset the ecu will relearn its self ,like it does with a stop start battery(agm).this is what i did with the throttle body,car drives fine.the battery relearning takes a day or so to work. |
||
11th Dec 2023 8:53 pm |
|
Nodge68 Member Since: 15 Jul 2020 Location: Newquay Posts: 2082 |
Doing a hard reset won't do an air path calibration, and it won't reset the TB. The new data from sensors and actuators needs the ECM to be put in a learning mode, then the engine is held at various RPMs at running temperature for about 30 minutes.
|
||
11th Dec 2023 9:16 pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis