Help please. Is there a special way to remove the engine cover.?
Two bolts, cannot find any more, funny screw? Sticking up at the back right.
Can lift the front of the cover but just cannot get it loose. What am I missing. Plenty on YouTube about removing covers but not an Fl2.
Thanks Jim A
Fl2 HSE 2010 auto
Disco 2Td5 auto 2002 gone
Disci 1 300Tdi auto 1996 gone

Two bolts at the front and one 10mm nut at the back, give it a good tug upwards and it will come off sometimes easier if the remove the air intake pipe. 2013 FL2 XS.
Defender 90 300 TDi.
Defender 90 300 TDi CSW.
1964 MGB Roadster.
1944 Willys MB "Jeep" with bullet holes. (gone)
17 hand Irish Drought Thoroughbred (mostly lame)
Nagging Old Boiler.

Mahatma Gandhi said if there is an Idiot in power those who elected him are well represented

Thanks Rommel, is the 10mil nut on the vertical screw.?
The screw does not have anything on it.
Cover is tight at that point.
Not desperate, read recently of some people having the sound deadening on the cover starting to perish.
Just decided to have a look. Anyway rain stopped play for today and tomorrow looks the same.
Thank you for your help and will try again.
PS as an aside----- my old father in law fought your ancestor in the western desert. Jim A
Fl2 HSE 2010 auto
Disco 2Td5 auto 2002 gone
Disci 1 300Tdi auto 1996 gone

Yes the nut would be on the vertical screw and I dropped mine the first time I took the cover off. It disappeared down the back of the engine!

Bob, that corner will not budge. Do i need to use brute force to get it to move?
As i said, just curious to look inside. Jim A
Fl2 HSE 2010 auto
Disco 2Td5 auto 2002 gone
Disci 1 300Tdi auto 1996 gone

Jim, you need to give it a sharp upwards pull, to separate the cover from the ball & socket mounts. (Now Sold). 2008 Freelander 2 (Nazca Sand) SE TD4 Auto. Statutory write off & on WOVR for hail damage but still road legal.
171037Km as of 09/05/22
Superchips Bluefin Flash
Nanocom Evo II (also sold)

As said above. But I have the petrol engine. You really need to give the cover in each corner a very firm sharp hard tug a few cm. The ball & socket mounts are extremely tight. Procrastination, mankind's greatest labour saving device!

Acoustic insulation ARB TPMS 3xARB air compressors After cooler Air tank On-board OCD pressure air/water cleaning Additional 50L fuel Carpet in doors ABE 2x1kg Waeco 28L modified fridge Battery 4x26ah Solar 120w Victron MPPT 100/20 DC-DC 18amps 175amp jumper plug Awning 6x255/60R18

If you skip to 30 seconds in this video, then you can see where the "hidden" 3rd nut location is: https://youtu.be/fuAY1_hFuPQ?si=myZ8TG0Bi_K_PWlE

To get the cover off, it is just a case of pulling it towards you with a decent amount of force. Some people take the pipe off at the back to make life easier, but it can be done with the pipe still in place.

Dean, thanks for the film. And thanks again to everybody for the replies. Jim A
Fl2 HSE 2010 auto
Disco 2Td5 auto 2002 gone
Disci 1 300Tdi auto 1996 gone

When you put it back , put some vaseline / grease on the balls - it will come off much easier next time. Jules

jules wrote:

When you put it back, put some vaseline / grease on the balls - it will come off much easier next time.

Nothing better than having Vaseline on yer balls ! ! 2013 FL2 XS.
Defender 90 300 TDi.
Defender 90 300 TDi CSW.
1964 MGB Roadster.
1944 Willys MB "Jeep" with bullet holes. (gone)
17 hand Irish Drought Thoroughbred (mostly lame)
Nagging Old Boiler.

Mahatma Gandhi said if there is an Idiot in power those who elected him are well represented

Much prefer copper grease 😉 Landrover - turning owners into mechanics since 1948

2014 Orkney grey Freelander SD4 GS.
2004 Zambezi silver Discovery 2 Td5 (Gone)
1963 Surf blue Morris Mini Minor Super de Luxe (my little toy)

the comedians on this forum make owning a landrover all worth while.
Brings a smile even in the worst problems.
Keep up the comments guys. Jim A
Fl2 HSE 2010 auto
Disco 2Td5 auto 2002 gone
Disci 1 300Tdi auto 1996 gone

Bobupndown wrote:

Much prefer copper grease 😉

That conducts electricity don't want that going through my balls.  2013 FL2 XS.
Defender 90 300 TDi.
Defender 90 300 TDi CSW.
1964 MGB Roadster.
1944 Willys MB "Jeep" with bullet holes. (gone)
17 hand Irish Drought Thoroughbred (mostly lame)
Nagging Old Boiler.

Mahatma Gandhi said if there is an Idiot in power those who elected him are well represented