Sometimes it is necessary to repair the Driver side electronics. If the driver's window cannot be adjusted using the console of switches, the motor can be operated directly using a 12V connection to switch the polarity of current to the window motor.
1. Remove the door card.
2. Unplug the window motor harness plug.
3. The wiring diagram shows Green+ (down) and Blue+ (up). However, the harness
wiring is Orange+ (down) and Grey+ (up).
4. Take 12V+ (Red) and GND (Black) from the plug of the Controller module. Bridge the
gap to the Orange+ and Grey (GND) to move the window down, reverse to move the window up.

Hope this helps.