I have a Haldex on my table and I am changing the lip seal - how about the bearing, shall I put some bearing grease too there also or it will get lubrication from Haldex fluid somehow?



 Evoque 2012, TD4
Freelander 1, KV6 (gone)
Volvo 2005, S40 2.4i
Audi TT 2005, 1.8 Quattro

Don't put any grease on the bearing, as it'll end up in the Haldex and cause issues.
The bearing is lubricated by the Haldex fluid. Hyundai Ioniq 5 Ultimate. The family car.
2009 Rimini Red SE TD4. Gone.
2006 Tonga Green i6 HSE. Gone.
Audi A5 convertible, my daily driver.
1972 Hillman Avenger GT, the project.

Thanks Nodge, there was a lot “paste” like a bearing grease but probably it’s from friction plates + Haldex fluid. Other places were quite clean but in space between bearing / lip seal was a lot of this.
Haldex itself is used one and I will put this one instead original - I have 250 000 km in the clock and this one has 60 000 miles, about 100 000 km. Control unit of original Haldex is broken and I will change whole Haldex instead of control unit only.
New filter and cleaning of unit + new seals. Evoque 2012, TD4
Freelander 1, KV6 (gone)
Volvo 2005, S40 2.4i
Audi TT 2005, 1.8 Quattro