Freel2.com - View topic - Alpine audio inop


Forum-Gallery-Shop-Sponsors « Advertise on Freel2.com

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > Alpine audio inop

Page 1 of 1

Print this entire topic ·

wylie

Member Since: 27 May 2023
Location: Uk
Posts: 3

2007 Freelander 2 TD4 XS Auto Izmir Blue

Alpine audio inop

Hi all hope you are all well.
I have a free l 2 2007 with alpine sound system.
Stop working just powers up then turns it self off.
Have substituted CD Drive,control panel,
Amp but was of eBay lol,have checked fib optic all seem to be doing there thing and loop seems good.
Done wiring checks to as best as possible Had most looms out to visually look,fuse box’s out etc etc
any ideas guys or is it a lap top job at land rover 😩
Cheers in advance 🙂

27th May 2023 5:12 pm

RocketStu

Member Since: 02 Aug 2021
Location: Isle of Wight
Posts: 31

2013 Freelander 2 SD4 XS Auto Santorini Black

Does it have the Bluetooth module? If so, try using a bypass loop to see if that corrects the problem and if so, replace the BT module.

27th May 2023 7:30 pm

wylie

Member Since: 27 May 2023
Location: Uk
Posts: 3

Hi Stu thx for that I’ve done that already tho bypassed all and still not having it.(with fib loop)
Done the resetting with rear fuse box buzz bar every time as well
Whats doing my head in it did couple of months ago carried out same diagnostic as doing now ,found the amp at fault bought one fitted working perfectly for about a month then packed up again so thought dogde eBay amp got another fitted worked for about a minute and packed up.
Done all diag again this time can’t get there this time everything shows fine to me?

Cheers

27th May 2023 8:39 pm

Nodge68

Member Since: 15 Jul 2020
Location: Newquay
Posts: 2082

2009 Freelander 2 TD4 SE Manual Rimini Red

Re: Alpine audio inop

wylie wrote:
Hi all hope you are all well.
I have a free l 2 2007 with alpine sound system.
Stop working just powers up then turns it self off.
Have substituted CD Drive,control panel,
Amp but was of eBay lol,have checked fib optic all seem to be doing there thing and loop seems good.
Done wiring checks to as best as possible Had most looms out to visually look,fuse box’s out etc etc
any ideas guys or is it a lap top job at land rover 😩
Cheers in advance 🙂

You can't just substitute another module on this system, as all modules (there are several) are linked by a coded data link (called a MOST loop), and a CAN bus, the audio going through the MOST, control and timing data being sent over the CAN. When a module that has a data bus is replaced, the master module (the unit with buttons) needs to be told what other modules are in the system, or it won't work correctly, if at all.

If the system fails to operate, then a diagnostic must be carried out on the system, and any error codes used to work out which part of the system is at fault. Hyundai Ioniq 5 Ultimate. The family car.
2009 Rimini Red SE TD4. Gone.
2006 Tonga Green i6 HSE. Gone.
Audi A5 convertible, my daily driver.
1972 Hillman Avenger GT, the project.

27th May 2023 9:06 pm

wylie

Member Since: 27 May 2023
Location: Uk
Posts: 3

Thank you so much..they need to be configured to control panel after fitting ok so need an IDS on it .go from there .
Thank you all for your help much appreciated 👍🏻

27th May 2023 9:23 pm

Page 1 of 1

All times are GMT

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum