Hi
First post new to forum

Just Purchased Freelander 2 HSE Luxury 2013 model

As you can see from photos I have two missing slats. I have tried to purchase a new cover to no avail.

Question is, how easy is it remove two from the end that folds into console you can’t see and replace where the two are missing.
1. Do I access the cover via the passenger trinket tray
2. How difficult is it
3. Would it work

Cheers

Paul

No idea about re-modelling your existing cover but the is a (claimed to be) new one here :

eBay item number:334075552086

https://www.ebay.co.uk/itm/334075552086?va...gJyHvD_BwE

Maybe try to get someone to 3D print you a couple ?

Cheers Gents thanks for the replies really appreciate it. 👍

3d printing, it will never match properly.

Leave it open. If you need to hide something, an old tissue provides more deterrent. Procrastination, mankind's greatest labour saving device!

Acoustic insulation ARB TPMS 3xARB air compressors After cooler Air tank On-board OCD pressure air/water cleaning Additional 50L fuel Carpet in doors ABE 2x1kg Waeco 28L modified fridge Battery 4x26ah Solar 120w Victron MPPT 100/20 DC-DC 18amps 175amp jumper plug Awning 6x255/60R18

Thanks to ReggiePerrin ( brilliant sitcom by the way) link on eBay £40 I bought the whole cup holder tray / cover. So hopefully I can click out two slats and pop them into one currently fitted. I know it’s only cosmetic but it pees me off.

Other wise I might have to fit the whole unit - not looking forward to that.

Quigley wrote:

I bought the whole cup holder tray / cover. So hopefully I can click out two slats and pop them into one currently fitted. I know it’s only cosmetic but it pees me off.

I did wonder if it was you that bought it… £40 was a result given the seller had pitched it at £75.



.

Cheers 👍