Freel2.com - View topic - Crankshaft Position Sensor: Genuine or.. Not?


Forum-Gallery-Shop-Sponsors « Advertise on Freel2.com

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > Crankshaft Position Sensor: Genuine or.. Not?

Page 1 of 3

Print this entire topic ·

steve421

Member Since: 20 May 2018
Location: Newcastle Upon Tyne
Posts: 21

2010 Freelander 2 TD4_e HSE Manual Alaska White

Crankshaft Position Sensor: Genuine or.. Not?

Hello!

It looks like the crankshaft position sensor on my 2007 Freelander 2 2.2 diesel has started acting up, the the car jerking and on occasion cutting out completely.

I rang my local Land Rover dealer and ordered a new one at a cost of £107 plus VAT, however looking on motor factor websites and eBay there are some for as little as £20.

Now I know this is probably a silly question, but are the £20 ones simply a waste of money? It seems too good to be true to be less than a fifth of the price.

Cheers

Steve

13th Oct 2022 11:33 am

Rommel

Member Since: 20 Aug 2017
Location: Sandhurst Berkshire
Posts: 649

2013 Freelander 2 TD4 XS Manual Fuji White

https://www.freel2.com/forum/topic36935.html

Hope someone has the answer? been asked before. 2013 FL2 XS.
Defender 90 300 TDi.
Defender 90 300 TDi CSW.
1964 MGB Roadster.
1944 Willys MB "Jeep" with bullet holes. (gone)
17 hand Irish Drought Thoroughbred (mostly lame)
Nagging Old Boiler.

Mahatma Gandhi said if there is an Idiot in power those who elected him are well represented

13th Oct 2022 1:59 pm

SpartanTate

Member Since: 21 Mar 2020
Location: England
Posts: 22

2008 Freelander 2 TD4 HSE Manual Santorini Black

I got a bosh branded replacement a while ago for £15 and have had no issues. And easy to swap over.

13th Oct 2022 2:00 pm

jules

Member Since: 13 Dec 2007
Location: The Wilds of Warwickshire
Posts: 5063

2014 Freelander 2 SD4 SE Auto Firenze Red

Re: Crankshaft Position Sensor: Genuine or.. Not?

steve421 wrote:
Hello!

It looks like the crankshaft position sensor on my 2007 Freelander 2 2.2 diesel has started acting up, the the car jerking and on occasion cutting out completely.

I rang my local Land Rover dealer and ordered a new one at a cost of £107 plus VAT, however looking on motor factor websites and eBay there are some for as little as £20.

Now I know this is probably a silly question, but are the £20 ones simply a waste of money? It seems too good to be true to be less than a fifth of the price.

Cheers

Steve

I wonder who makes the ones JLR sell ? Jules

13th Oct 2022 4:23 pm

Nodge68

Member Since: 15 Jul 2020
Location: Newquay
Posts: 2082

2009 Freelander 2 TD4 SE Manual Rimini Red

LR use Febi, as that's a PSA OE supplier.
I'd avoid cheap Ebay specials, as the pins are often too thin, causing bad connections which results in rapid sensor failure. I've had 2 cheap sensors fail in 18 months, so I now have a Febi sensor, and I replaced the plug too, so a firm connection was guaranteed. Hyundai Ioniq 5 Ultimate. The family car.
2009 Rimini Red SE TD4. Gone.
2006 Tonga Green i6 HSE. Gone.
Audi A5 convertible, my daily driver.
1972 Hillman Avenger GT, the project.

13th Oct 2022 5:07 pm

jimbowats

Member Since: 11 Apr 2018
Location: uk
Posts: 44

Id go genuine or OEM as some other posters have suggested.

I bought this one https://www.ebay.co.uk/itm/153013054913 and it lasted 2 weeks before I broke down...the car just cut out (its an auto as well so can't have been great for the gearbox) and coasted to a stop..luckily I had somewhere to pull in safely.

Bought a genuine Land rover one and its been fine ever since.

13th Oct 2022 5:20 pm

I Like Chips

Member Since: 25 Jun 2017
Location: Ascott Under Wychwood
Posts: 1546

2011 Freelander 2 SD4 HSE Auto Indus Silver

There a two different types of Crank sensor depending on VIN

13th Oct 2022 7:24 pm

Grimdog

Member Since: 08 Sep 2020
Location: Wakefield
Posts: 316

2010 Freelander 2 TD4_e HSE Manual Barolo Black

Would you like to elaborate please Chips. I am currently arguing with auto doc, regarding a cps that was recommended by Alex on this forum. My old sensor was throwing fault codes, and I had a few "jerky" moments. The replacement sensor they supplied, when fitted to the car, made it impossible to start. Re-installation of the old one and it fired straight up ( albeit with clouds of smoke from the sunburnt fuel and non start !).

13th Oct 2022 10:23 pm

I Like Chips

Member Since: 25 Jun 2017
Location: Ascott Under Wychwood
Posts: 1546

I don't know the difference, perhaps others do. They may be compatible, the info varies depending on which site you use but anyway here they are

LR000681 from VIN AH

LR056028 from VIN BH

14th Oct 2022 6:37 am

I Like Chips

Member Since: 25 Jun 2017
Location: Ascott Under Wychwood
Posts: 1546

Grimdog wrote:
Would you like to elaborate please Chips. I am currently arguing with auto doc, regarding a cps that was recommended by Alex on this forum. My old sensor was throwing fault codes, and I had a few "jerky" moments. The replacement sensor they supplied, when fitted to the car, made it impossible to start. Re-installation of the old one and it fired straight up ( albeit with clouds of smoke from the sunburnt fuel and non start !).

I've had that myself, I just bought another one, it has been fine for the last three years.

Quality control has always been a problem, not just with car parts. The door in the factory signed Testing Dept on opening leads to the outside World

Last edited by I Like Chips on 14th Oct 2022 6:45 am. Edited 1 time in total

14th Oct 2022 6:39 am

Nodge68

Member Since: 15 Jul 2020
Location: Newquay
Posts: 2082

Grimdog wrote:
Would you like to elaborate please Chips. I am currently arguing with auto doc, regarding a cps that was recommended by Alex on this forum. My old sensor was throwing fault codes, and I had a few "jerky" moments. The replacement sensor they supplied, when fitted to the car, made it impossible to start. Re-installation of the old one and it fired straight up ( albeit with clouds of smoke from the sunburnt fuel and non start !).

The target wheel and sensor was changed to the later type quite early on in production, and many early ones will have been changed to the later type during subsequent maintenance work.

It's strange that there was smoke after the failed start, as a missing crank signal will or should prevent fuel from injected.

It is possible that excess oil was drawn in while cranking, which may have been responsible for the smoke? Hyundai Ioniq 5 Ultimate. The family car.
2009 Rimini Red SE TD4. Gone.
2006 Tonga Green i6 HSE. Gone.
Audi A5 convertible, my daily driver.
1972 Hillman Avenger GT, the project.

14th Oct 2022 6:44 am

jules

Member Since: 13 Dec 2007
Location: The Wilds of Warwickshire
Posts: 5063

Nodge68 wrote:
LR use Febi, as that's a PSA OE supplier.
I'd avoid cheap Ebay specials, as the pins are often too thin, causing bad connections which results in rapid sensor failure. I've had 2 cheap sensors fail in 18 months, so I now have a Febi sensor, and I replaced the plug too, so a firm connection was guaranteed.

How did you replace the plug?

FWIW I find the JLR connectors break easily when old; the locking tab snaps - but maybe im using the wrong technique to open the plug. Jules

14th Oct 2022 9:31 am

Grimdog

Member Since: 08 Sep 2020
Location: Wakefield
Posts: 316

Chips ..... Thanks for the heads up, I will do a bit of research, perhaps I had the wrong part....

14th Oct 2022 11:58 am

Grimdog

Member Since: 08 Sep 2020
Location: Wakefield
Posts: 316

Chips ..... Thanks for the heads up, I will do a bit of research, perhaps I had the wrong part....

14th Oct 2022 11:58 am

oldgeezer

Member Since: 09 Apr 2011
Location: Wiltshire
Posts: 1302

2013 Freelander 2 TD4 GS Manual Baltic Blue

genuine all day long, "buy cheap buy twice" or even three times Jaguar x-type sport gone
Jaguar x-type 2.2d sport one of my best cars ever sadly gone
Freelander 2 GS auto 2008 most unreliable ever ! gladly gone
Freelander 2 GS manual 2013 only time will tell !

14th Oct 2022 12:02 pm

Page 1 of 3

All times are GMT

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum