Deano64 wrote:

Apparently not removing the 70ml of oil won’t make any difference. Dont think I’ll be reversing too much on full lock in the future. Time to consider getting rid I think and get a cheap runabout

70ml is nothing, and there's plenty of space above the filler hole, so I can't see how 70ml makes much difference.
Apparently there's a magic cure, but the person who said there was never came back to share what this magic cure was.  Hyundai Ioniq 5 Ultimate. The family car.
2009 Rimini Red SE TD4. Gone.
2006 Tonga Green i6 HSE. Gone.
Audi A5 convertible, my daily driver.
1972 Hillman Avenger GT, the project.

Nobody can see the 70 ml making any difference 😬- I wonder what the wonder cure is 🤪. I’m sure Bell can fix it, but it’s a long way from Yorkshire but it might be needs must . The garage who serviced the Haldex said it didn’t look too clogged, but there was swarf in the screen, but he didn’t think excessive. Showed me a picture but I couldn’t tell how bad it was . I’ve seen worse pics on here !

Some useful Haldex Faultfinding info here:

https://www.haldexrepairs.co.uk/land-rover...solutions/

So, if you remove say 500ml from the PTU then you return 500ml of fresh and no need to worry about overfilling it??
I am not too bothered if i get out less than what should come out as fresh oil, even mixed with old oil is better than old oil

That's assuming of course the correct amount was in the box to start with


Doing the correct procedure, it's seems silly and a PITA but you will end up with the correct amount required.

I did mine a couple of weeks ago, using the correct procedure.
My shudder has now gone, but I suspect it'll be back as the fluid degrades
I'm thinking I'll change the Haldex fluid annually, to make sure it's always clean and fresh. Hyundai Ioniq 5 Ultimate. The family car.
2009 Rimini Red SE TD4. Gone.
2006 Tonga Green i6 HSE. Gone.
Audi A5 convertible, my daily driver.
1972 Hillman Avenger GT, the project.