Hi,

I have an issue on one or several parking sensor(s) on my freelander 2.

# Land Rover Freelander 2 (21/12/2009)
# L359 (SALFA2DB4AH175166)

How can I identify which one is faulty ?

Is there a scan tool you recommend ?

Brest regards,
S

With igniton on place a piece of card close each one the ones that do not bleep are the failed ones . 2013 FL2 XS.
Defender 90 300 TDi.
Defender 90 300 TDi CSW.
1964 MGB Roadster.
1944 Willys MB "Jeep" with bullet holes. (gone)
17 hand Irish Drought Thoroughbred (mostly lame)
Nagging Old Boiler.

Mahatma Gandhi said if there is an Idiot in power those who elected him are well represented

or,

ignition on select reverse then listen to each sensor your wanting a faint clicking/ticking noise
if you find any not clicking try swapping for one that is working to see if its the sensor or wiring ?

if you have access to an IID you can plug that in and it could show each working and the distance for each sensor
(mates IID worked on my 2013)

 .
my first ever FL2 and I did keep it longer than most other cars!
But its now gone way up Norf

Thanks to both of you for your fast answer

After investigation:

-As the parking sensor electronics was beeping continuously
(A faulty sensor makes the led of the parking assistance Blink)

I decided to check all sensors by recording the sound of the sensors with my smartphone and listen the "tick"
=> all where functional.

- I dismounted the rear right sensor by hand (No tools needed) / cleaned it and re-fitted it correctly.

=> All is now working fine !

Thanks again for you help.
S

well done. Glad you got it sorted. Jules