RTC
Member Since: 05 Apr 2022
Location: Worksop
Posts: 1

|
New member, have an 07 HSE 2.2
Thanks for the codes
I have the following codes, with explanations my question is how to solve them
===========1==============
P062F(00)
Raw code: 062F00
ECU: Engine control unit
Status: Test failed, Confirmed, Test failed since last DTC clear, Warning indicator requested
OBDII: Engine control module (ECM), EEPROM error
============2==============
P061B(83)
Raw code: 061B83
ECU: Engine control unit
Status: Test failed, Confirmed, Test failed since last DTC clear, Warning indicator requested
OBDII: Engine control module (ECM), torque calculation - performance problem
============3==============
P0299(00)
Raw code: 029900
ECU: Engine control unit
Status: Test failed, Pending, Test failed since last DTC clear, Test not completed during this operation cycle
OBDII: Turbocharger (TC)/supercharger (SC) - low boost
============4==============
P02E7(2
Raw code: 02E728
ECU: Engine control unit
Status: Test failed, Test failed (current drive cycle), Confirmed, Test failed since last DTC clear, Test not completed during this operation cycle
OBDII: Intake air flap control actuator position sensor - range/performance
============5==============
P0973(00)
Raw code: 097300
ECU: Transmission control unit
Status: Test not completed during this operation cycle
OBDII: Shift solenoid (SS) A - circuit low
I’m in Worksop any advice, I’ll check hoses to turbo and intercooler
|
5th Apr 2022 9:37 pm |
|