Evening folks can anyone tell me if a new drivers door control unit requires coding to the car ?
Cheers in anticipation
Sharks MY18 D5 HSE LUX 😎
MY12 FL2 SD4 HSE
Ex D4
Ex D3
Ex D2
Ex D1
Ex FREELANDER 1

It's on the medium speed CAN, so it'll need configuring to the vehicle.
The workshop manual supports that. Hyundai Ioniq 5 Ultimate. The family car.
2009 Rimini Red SE TD4. Gone.
2006 Tonga Green i6 HSE. Gone.
Audi A5 convertible, my daily driver.
1972 Hillman Avenger GT, the project.

Hi Nodge
Do you know if it can be done with the IID Tool ? MY18 D5 HSE LUX 😎
MY12 FL2 SD4 HSE
Ex D4
Ex D3
Ex D2
Ex D1
Ex FREELANDER 1

I don't know if the IID can do it, mine stopped working, so I got a mongoose cable and now run SDD for diagnostics. Hyundai Ioniq 5 Ultimate. The family car.
2009 Rimini Red SE TD4. Gone.
2006 Tonga Green i6 HSE. Gone.
Audi A5 convertible, my daily driver.
1972 Hillman Avenger GT, the project.

Thanks I’ll have a look.
One of the approach lamps in the mirror has stopped working after I had fitted a new mirror, checked the feed at the door module and only getting 0.2 v and the continuity upto the mirror is good so can’t be the wiring that’s why I think it may need re coding as the nearside one is fine  MY18 D5 HSE LUX 😎
MY12 FL2 SD4 HSE
Ex D4
Ex D3
Ex D2
Ex D1
Ex FREELANDER 1