Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Off Topic > Home Electrics. |
|
|
Denboy Member Since: 24 Oct 2019 Location: Merseyside Posts: 56 |
Hi the water and gas should have earth from the consumer |
||
3rd Dec 2021 7:00 am |
|
RogB Member Since: 16 Dec 2014 Location: Mansfield Posts: 3880 |
ring British Gas and/or Western Power and get them to come out and sort it. If you do it yourself and something goes wrong when doing it or in the future they will jump all over what ever is left of you. |
||
3rd Dec 2021 7:42 am |
|
simong_uk Member Since: 31 Jan 2014 Location: Sutton Coldfield Posts: 146 |
There should be a bond as it comes in the house and before any T's - you may find it inside the house though (Although the necessity of such a bond when the incoming pipe is plastic can be debated)
|
||
3rd Dec 2021 9:22 am |
|
Dartman the one Member Since: 04 Apr 2013 Location: Seville, Spain Posts: 1689 |
T he question is what are you earthing?, gas to the meter is in plastic, water also is now plastic to the connetion of the house mains isolator, the boiler is earthed through its mains plug which is in turn connected via the boiler casing to the pipes, the mains electricity is earthed via the armoured casing of the mains cable and all the house earths are connected to this earth at the meter and consumer unit. the only thing that makes sense is to have a earth stake driven into the ground and all metal piping connected to that stake along with the mains cable earth my PC is slightly to the right of Genghis
|
||
3rd Dec 2021 9:28 am |
|
merlinj79 Member Since: 13 Aug 2019 Location: San Diego Posts: 315 |
In the US the gas pipe cannot be used as THE earth for the home system. But the part after the service shutoff is supposed to have it's own earth cable TO the main earth system. That connection does not have to be at the main box, the gas is allowed to be grounded using the ground at the gas appliance... so yours might be grounded at the stove, furnace, etc. Better call a local electrician though, your rules might be different, but probably not too much. |
||
3rd Dec 2021 3:11 pm |
|
MartynB Member Since: 08 Aug 2011 Location: Currently Rootless ! Posts: 1781 |
I’d get a qualified sparky to have a look if you are new to the house and don’t know the history , or it isn’t clear on an Electrical report. It wouldn’t be the first time an earth or an equipotential bond had been removed or rendered useless by a bit of enthusiastic DIY plumbing or the insertion of some plastic pipe . We fitted a new kitchen for a mate in a house renovation . The bonding from the stainless sink we removed went to both hot and cold copper pipes then terminated with six inches of of Earth cable shoved through a floor board ! 2009 GS Auto Zermatt Silver - Sold June 21 after 10 years of ownership
|
||
3rd Dec 2021 6:18 pm |
|
Kage Member Since: 03 Oct 2018 Location: Midlands Posts: 236 |
Axle, didn’t you have any sort of survey done prior to exchanging contracts?
|
||
3rd Dec 2021 7:39 pm |
|
Andy131 Member Since: 09 Dec 2009 Location: Manchester Posts: 2187 |
BS7671 18th edition = current electricians bible
|
||
3rd Dec 2021 11:47 pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis