Hi. Recently got a 2013 SD4 GS. I've been giving it a good check over. I noticed that the rear cv on the prop is leaking grease round the front cover. I am tipping that something must have been disturbed as it had the haldex removed and serviced by the previous owner. Any advice on re-greasing and sealing folks? I have cleaned it up since and tightened the bolts as they weren't up to the correct torque and a little bit more has come out but not much. I'm obviously concerned about it running dry.

Thanks in advance. 2013 Freelander 2 SD4 GS - Orkney Grey

Could be wrong, but IIRC it's permanently sealed and the shaft will need to be replaced. I got a low-mileage used one.