Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Technical > Heater only blowing in footwell when set to “auto”
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Ellis



Member Since: 11 Aug 2021
Location: South East
Posts: 1

United Kingdom 2010 Freelander 2 TD4_e XS Manual Stornoway Grey
Heater only blowing in footwell when set to “auto”

Hi all, I wonder if you can help me? In my Freelander 2 when I set the climate control to “auto” with any kind of warm temperature, the heat will only come out from the footwell blowers. I am able to set the system manually and it will blow heat from the dashboard blowers just fine, the error only occurs on auto.

This issue happens on both sides of the dual zone system. Cold temperatures on “auto” will come from the dash blowers just fine.

When I was fiddling around during a drive, I was flicking the dials from hot to cold and at one point, on the driver’s said, the system started blowing hot air from the dashboard blowers but the temperature was set to maximum cold! I may have confused the system because the passenger side was set to cold also but working fine.

Anyway, I’ve not got the foggiest why it’s not making use of the dashboard blowers. Surely this isn’t normal behaviour for the automatic climate control system?

Thanks in advance,

Ellis

Post #411284 11th Aug 2021 5:57 pm
View user's profile Send private message View poster's gallery Reply with quote
jimbowats



Member Since: 11 Apr 2018
Location: uk
Posts: 44

Same thing happens in mine..I did think it was a bit odd but I just assumed it’s how they are. Maybe some other owners can check and report back if it’s the same in their cars?

Post #411289 11th Aug 2021 9:00 pm
View user's profile Send private message View poster's gallery Reply with quote
IanMetro



Member Since: 11 Sep 2017
Location: Somerset BS21
Posts: 3156

United Kingdom 2014 Freelander 2 SD4 Metropolis LE Auto Fuji White

If it works manually to correct ducts, then it is most likely OK.
I am puzzled about lack of really cold air, if Air Con is selected on the FL2 gives a plentyfull supply of cold air.

When it is in Auto, many sensors decide where the air goes, and at what temperature.

If it is going wrong there should be an error code in the system waiting to be read.

Link to Repair Manual - Climate Control section about page 1633.

https://www.dropbox.com/s/n0e6q5jj1l1fe2z/...6-2010.pdf

(Although I need to select manual air distribution in some extreme damp conditions, my Climate Control works away quite successfully for weeks on end with no input from me.) FL2 XS SD4 Auto 2010 2012-2017 (21k - 91k miles) (MY2011)
FL2 Metropolis SD4 Auto 2014 2017- (16k - 77k+ miles) (MY2015)
Metro in its 11th Year of (Extended) LR Warranty / Full LR Service History
(Expensive, but Trouble/Worry free - hopefully?)


Last edited by IanMetro on 12th Aug 2021 6:29 pm. Edited 1 time in total

Post #411290 11th Aug 2021 10:10 pm
View user's profile Send private message View poster's gallery Reply with quote
Dave47



Member Since: 31 Aug 2014
Location: Margate Kent
Posts: 1333

United Kingdom 2008 Freelander 2 TD4 SE Auto Izmir Blue

IIRC, climate control will only work correctly
if both temperature dials are set at no more than two degrees difference to each other. DAVE.

Post #411292 12th Aug 2021 8:08 am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site