Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > General > Raising suspension |
|
|
ribama1 Member Since: 12 May 2021 Location: brisbane Posts: 73 |
I don't know it if you are considering fitting it yourself. I did the rear shocks a few weeks back and when you push the axel down to get the new strut assembly in it pops out of the diff. I got it back in but I noticed that Bevis Pitts and powerfuluk also had this problem but worse because the axel has to go down even further with the lift kit. In the case of powerfuluk they had to rebuild the bearings. So I decided not to go there. [/b] |
||
7th Aug 2021 10:41 am |
|
Lightwater Member Since: 21 Aug 2014 Location: Sydney Northern Beaches Posts: 4908 |
Before you start fiddling around with suspension. Put 17" rims on the car if you don't have them, with 245/70 tyres. Then go from there.
|
||
7th Aug 2021 9:27 pm |
|
itsaguything Member Since: 25 Apr 2019 Location: Ottawa Posts: 90 |
Agreed! Guy Pensa
|
||
10th Aug 2021 10:33 am |
|
3landertwo Member Since: 27 May 2020 Location: UK Posts: 1132 |
set of 50mm spacers currently on eBay.
|
||
23rd Sep 2021 2:33 pm |
|
PRadd Member Since: 09 Apr 2020 Location: East Lancs Posts: 366 |
They would make the FL2 wider, not taller & likely illegal as well without wider wheel arches - ISTR that wheels & tyres are required to not stick out beyond the body? 2014 Freelander 2 TD4 Manual Dynamic
|
||
23rd Sep 2021 2:53 pm |
|
RealBeale Member Since: 13 Jun 2016 Location: Birmingham Great Barr Posts: 922 |
I've got 30mm wheel spacers fitted and that is the very maximum I would go for.
|
||
23rd Sep 2021 4:23 pm |
|
Kage Member Since: 03 Oct 2018 Location: Midlands Posts: 236 |
Why do you think it’s a good idea? Where are you going to drive it? |
||
23rd Sep 2021 7:06 pm |
|
ribama1 Member Since: 12 May 2021 Location: brisbane Posts: 73 |
They are a good idea if you are driving on Australian beaches. With the lift the car will push less sand, make for a better drive and easier cleanup afterwards. The sand is pushed into everywhere! I probably wont go on a beach again until I've done it. I need to work on the suspension again when everything else is done. |
||
1st Oct 2021 10:40 pm |
|
ozjeff62 Member Since: 28 May 2018 Location: Sydney, NSW Posts: 494 |
ribama1 said:
|
||
2nd Oct 2021 8:40 am |
|
Lightwater Member Since: 21 Aug 2014 Location: Sydney Northern Beaches Posts: 4908 |
Some beaches in Australia, the sand is like concrete. Others, the sand is so aerated it is a lost cause.
|
||
2nd Oct 2021 9:26 am |
|
Kage Member Since: 03 Oct 2018 Location: Midlands Posts: 236 |
OP is in Northumberland UK, so is unlikely to be driving on Australian beaches. |
||
2nd Oct 2021 9:27 am |
|
ribama1 Member Since: 12 May 2021 Location: brisbane Posts: 73 |
On most of the beaches where I live, at least some of the time you are forced to drive in the wheel tracks of other vehicles. Sand humps naturally build up between the wheel tracks. When you have a relatively low clearance the undercarriage is constantly knocking the top off the hump between the wheel tracks that most others can clear. Its soft sand, but it pushes up into all sorts of areas you don't want sand and is a to get out. The FL2 handles it, but it would be more comfortable with a lift kit. |
||
2nd Oct 2021 12:03 pm |
|
Lightwater Member Since: 21 Aug 2014 Location: Sydney Northern Beaches Posts: 4908 |
If you really want a capable vehicle a Freelander is not the ideal choice.
|
||
2nd Oct 2021 12:30 pm |
|
Jimboland Member Since: 06 Dec 2015 Location: Northants Posts: 737 |
|
||
3rd Oct 2021 7:02 am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis