Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Technical > Removing EGR valve and cooler |
|
|
Balderick Member Since: 10 Apr 2021 Location: Lincolnshire Posts: 10 |
Hi, new to the form and many thanks for the EGR tips! I have restricted engine performance and a sensor 1 high temp error. I have bought a new EGR as after 117000 miles it is game on for anything, so hopefully following your advice I can crack the over heating of the exhaust gases and get my performance back.
|
||
10th Apr 2021 8:05 pm |
|
Pedro Member Since: 01 Apr 2010 Location: Very near Pig Hill Posts: 449 |
I did my EGR valve a couple of months back:
|
||
10th Apr 2021 8:46 pm |
|
BossBob Member Since: 30 Sep 2010 Location: Bristol Posts: 1369 |
Welcome. On cold mornings when the HDC fault is likely to occur, I start the car in two stages. After putting the key in the dock I press the start button without pressing the clutch/brake pedal. Wait a few seconds for the various control units to initialise and various pumps (abs and Haldex) to get up to speed, then press the pedal and start the engine. The abs is a big part of HDC so if that isn’t available nor is HDC. |
||
11th Apr 2021 9:42 am |
|
Balderick Member Since: 10 Apr 2021 Location: Lincolnshire Posts: 10 |
Hi, I had a HDC start fault. The battery is most likely the culprit. Check You are getting at least 12.5V or the Freelander 2 starting fairy will sulk.
|
||
15th Apr 2021 4:36 pm |
|
JackGlendinning Member Since: 03 Jun 2020 Location: Goudhurst Posts: 5 |
Hi all
|
||
25th May 2021 11:17 am |
|
Balderick Member Since: 10 Apr 2021 Location: Lincolnshire Posts: 10 |
Hi, A late reply but I took off the cam belt cover to get position on the 2 x bolts. A mirror, patience and brand new replacement bolts +gasket is well worth it.
|
||
5th Jun 2021 7:39 pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis