Hi everyone,

I'm a proud owner of a Freelander 2 HSE LUX 2013 model which I absolutely love. Unfortunately the driver's seat memory module was missing upon purchase. I called Land Rover main dealer and found out the correct part number for the seat module of my vehicle 'LR041896' and the engineering number is 'DJ32 14D600 AA'.

I purchased a second hand memory module on ebay with 'almost' the same engineering number 'BJ32 14D600 AF'. After installing, all the buttons including memory settings seem to work but only in small increments?! I am not sure if this due to the part numbers differing ever so slightly?

I called main dealers for a new module and they quoted me £203 + £210 to program!!!! I assumed it would simply be a plug and play but apparently not....

Has anyone else came across the same issue as me? I would really appreciate any help or guidance at this stage.

Thank you in advance.

welcome to the forum
do you know why the module was missing ? there may be a fault with the wiring loom that led to the previous owner removing the module as the loom was at fault. Or maybe the seat was changed for some reason, hopefully not due to accident damage.
Have you had the codes read to see if they shed any light?
seem very unusual for the seat memory module to be removed unless there was an underlying reason

Rog

Have you tried standing outside the car and driving the seat fully in all directions (even if it means multiple presses of the buttons.
Hopefully you can then confirm that there is no resistance to movement or physical damage.
And/or maybe, just maybe, the seat will magically reset itself and work, as other moving bits on the FL2 seem to do. FL2 XS SD4 Auto 2010 2012-2017 (21k - 91k miles) (MY2011)
FL2 Metropolis SD4 Auto 2014 2017- (16k - 77k+ miles) (MY2015)
Metro in its 11th Year of (Extended) LR Warranty / Full LR Service History
(Expensive, but Trouble/Worry free - hopefully?)

https://www.freel2.com/forum/topic7539.htm...at+forward

I placed the words 'electric seat forward' in the SEARCH (of old posts) and found the above.

looks like the seat needs to be re-set ..... by dealer ???


try this.....

end seat calibration.

hold forward switch on, then started engine and seat went forward, must be away if resetting end points