Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > General > no fourwheel drive |
|
|
Dartman the one Member Since: 04 Apr 2013 Location: Seville, Spain Posts: 1687 |
The Haldex unit is at the rear, what you describe is no drive from the transfer box, how much can you turn it? my PC is slightly to the right of Genghis
|
||
14th Feb 2021 6:00 pm |
|
Nodge68 Member Since: 15 Jul 2020 Location: Newquay Posts: 2082 |
If you can turn the propshaft with only slight resistance and all 4 wheels on the ground, then it points to the splines between the gearbox and PTU being stripped. Hyundai Ioniq 5 Ultimate. The family car. 2009 Rimini Red SE TD4. Gone. 2006 Tonga Green i6 HSE. Gone. Audi A5 convertible, my daily driver. 1972 Hillman Avenger GT, the project. |
||
14th Feb 2021 6:56 pm |
|
tuneupsteve Member Since: 14 Feb 2021 Location: sussex Posts: 3 |
thanks for reply, i can turn it with very little resistance all the way round, I think this happened after mot when they put it on the brake rollers and forgot to set it for 4x4 system and it spun the rear wheels on the concrete, may need a word with the mot station once I have it checked. |
||
14th Feb 2021 8:07 pm |
|
3landertwo Member Since: 27 May 2020 Location: UK Posts: 1127 |
I had my car tested only last week, same guy every year. He knows not to put it on the rolling road.
|
||
14th Feb 2021 8:17 pm |
|
seagull1 Member Since: 23 Jan 2011 Location: Loughborough Posts: 327 |
My MOT station always use a Tapley Brake Test Meter (decelerometer) to test the brakes.
|
||
14th Feb 2021 9:26 pm |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 5020 |
Interesting : I thought the brake rollers did the driving of the wheels rather than the other way round. What I'd like to know is if the FL2 engine is running with the gearbox is in neutral, and the front wheels are spun up by the brake roller will the system interpret that as "front wheel spin" and engage the haldex causing drive to go through to the rear wheels (just like it does when starting off fast) ? If the haldex remains disengaged when the gearbox is in neutral then no drive should get through to the rear wheels. If that is the case then I see no problem in using a FL2 on a single axle brake roller - its not permanent 4WD. Happy to be corrected. Jules |
||
14th Feb 2021 9:35 pm |
|
alex_pescaru Member Since: 12 Mar 2009 Location: RO Posts: 4642 |
You're correct.
|
||
14th Feb 2021 10:45 pm |
|
Badger51 Member Since: 01 Mar 2014 Location: Coffs Harbour Posts: 962 |
More info in this thread re brake testers!
|
||
14th Feb 2021 10:54 pm |
|
IanMetro Member Since: 11 Sep 2017 Location: Somerset BS21 Posts: 3133 |
There is this note in the handbook on page 216
|
||
14th Feb 2021 11:05 pm |
|
Badger51 Member Since: 01 Mar 2014 Location: Coffs Harbour Posts: 962 |
IanMetro, Steve D is an MOT tester, see his posts in the link I posted! (Now Sold). 2008 Freelander 2 (Nazca Sand) SE TD4 Auto. Statutory write off & on WOVR for hail damage but still road legal.
|
||
14th Feb 2021 11:40 pm |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 5020 |
Every day is a school day - I didnt know the rollers could rotate in opposite directions Jules |
||
15th Feb 2021 12:11 am |
|
Scudmonkey Member Since: 27 Jun 2020 Location: Bettws South Wales Posts: 27 |
Ahh this explains a few things...
|
||
15th Feb 2021 6:10 am |
|
IanMetro Member Since: 11 Sep 2017 Location: Somerset BS21 Posts: 3133 |
Alex, Badger, (and Steve D) sorry about missing your posts, I was typing my reply when you posted.
|
||
15th Feb 2021 7:59 pm |
|
3landertwo Member Since: 27 May 2020 Location: UK Posts: 1127 |
...... or the method of placing a house hold brick, on it's end, in the passenger's footwell ....... did steve do that as an apprentice. |
||
15th Feb 2021 8:35 pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis