Has anyone fitted any of these bulbs to their Fl2 ? https://www.eurocarparts.com/p/brightstar-...-971779511

Mark 2009 FL2 TD4 SE (Sadly gone)
2007 FL2 TD4 GS (The wifes , gone after 8 great years)
2012 FL2 SD4 SPORT LE(Gone and missing it)
2015 DISCOVERY SPORT 2.2SD4 HSE (Now gone)
2014 Ford Bmax 1.0 ecoboost ( Gone but what next )
2014 Ford Focus 2.0tdci Zetec S (Gone,but what a car)
2020 Ford Fiesta ActiveX 1.0 Ecoboost
2024 Skoda Kodiaq 1.5 Tsi SEL

I have successfully fitted them to my two bikes in both main and dipped beam. My plans are, now that they do one with the 'box of tricks' incorporated in the body of the lamp to fit them into the Landy.

I have no links with these guys but may I suggest here;

https://www.classiccarleds.co.uk/collectio...ped-glb477

Two bulbs for less than £40

These are the same as what I put in the second bike, great as there was restricted room.

I’d be concerned that on the standard lamp the connector is the retaining mechanism. It doesn’t look as if this will work with the LED.

The lamps are held in by a spring clip.

A standard H7 bulb then has the connector pushed on to it,
it doesn't form any part of the mechanical fixing of the bulb.

DEG5Y wrote:

Two bulbs for less than £40

Still a good price.

DEG5Y wrote:

The lamps are held in by a spring clip.

A standard H7 bulb then has the connector pushed on to it,
it doesn't form any part of the mechanical fixing of the bulb.

Maybe on your fl2, but on mine, there are no fixings other than the connector. To remove or replace a lamp, squeeze up on the clip at the bottom of the connector and pull or push as needed. I’m familiar with the springs that hold H7 and H4 lamps in place. If I’d found them when changing my lamps I’d have jumped at the chance of improving my ability to see at night.

I stand corrected, Mines a MY59.