Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Maintenance & Modifications > Condensation in headlight |
|
|
riverblanche Member Since: 11 Apr 2019 Location: Retford'ish Posts: 438 |
Hi,
|
||
29th Dec 2020 4:31 pm |
|
Lakelander Member Since: 07 Nov 2019 Location: Cumbria Posts: 244 |
Does your FL2 have Xenons?
|
||
29th Dec 2020 6:36 pm |
|
3landertwo Member Since: 27 May 2020 Location: UK Posts: 1127 |
https://www.freel2.com/forum/topic1447.htm...ation+lamp
|
||
29th Dec 2020 6:42 pm |
|
Wonderdust Member Since: 23 Mar 2020 Location: Bucks Posts: 161 |
Who's a clever boy! |
||
29th Dec 2020 7:02 pm |
|
Dave47 Member Since: 31 Aug 2014 Location: Margate Kent Posts: 1333 |
I had much the same problem on my D2,
|
||
30th Dec 2020 11:45 am |
|
SYFL2 Member Since: 16 Jun 2012 Location: Sheffield Posts: 2594 |
I had condensation in a rear light the plastic had separated on the edge a bit of black silicone sorted it. |
||
30th Dec 2020 11:52 am |
|
Lakelander Member Since: 07 Nov 2019 Location: Cumbria Posts: 244 |
Thanks, not sure if there are ventilation valves on mine? Will investigate once the weather warms up? FL2 SD4 XS 2013 Orkney Grey |
||
30th Dec 2020 4:14 pm |
|
riverblanche Member Since: 11 Apr 2019 Location: Retford'ish Posts: 438 |
Hi,
|
||
30th Dec 2020 8:43 pm |
|
Lakelander Member Since: 07 Nov 2019 Location: Cumbria Posts: 244 |
Have taken the headlight out this morning and there doesn't appear to be anything like a ventilation valve? The lense clips onto the body in various places and is also bonded all the way round. Will try it out indoors before replacing but I fear the misting will return FL2 SD4 XS 2013 Orkney Grey |
||
31st Dec 2020 2:05 pm |
|
Lakelander Member Since: 07 Nov 2019 Location: Cumbria Posts: 244 |
That should read " dry" not " try"
|
||
31st Dec 2020 2:07 pm |
|
Deano64 Member Since: 16 Aug 2013 Location: Huddersfield Posts: 602 |
It’s appeared in both my headlights now . It comes and goes. Have dried one out indoors so we’ll see |
||
21st Mar 2021 1:01 pm |
|
tenet Member Since: 23 Jul 2009 Location: cotswolds Posts: 1081 |
No condensation but a dead wasp - how did that get in there? MY 09 GS manual in Lago Grey, Wood Co arm rest and side bumper strips - now sold.
|
||
21st Mar 2021 3:18 pm |
|
3landertwo Member Since: 27 May 2020 Location: UK Posts: 1127 |
the wasp died due to dehydration |
||
21st Mar 2021 3:39 pm |
|
Lakelander Member Since: 07 Nov 2019 Location: Cumbria Posts: 244 |
Mine now 99% cleared , but it's been there over 3 months! and this happens each winter. My theory is that cold water spray gets in when driving through puddles on the nearside . Then there is not enough heat and too much humidity to dry it out until regular sunshine arrives. The units are not fully sealed and have a big glass area. FL2 SD4 XS 2013 Orkney Grey |
||
21st Mar 2021 6:43 pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis