![]() |
|
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > Technical > SDD help required |
![]() ![]() |
|
|
gasman Member Since: 02 May 2013 Location: Tyneside Posts: 900 ![]() ![]() ![]() |
Have been having lots of issues with sticking turbo but think that is fixed now.
|
||
![]() |
|
gasman Member Since: 02 May 2013 Location: Tyneside Posts: 900 ![]() ![]() ![]() |
Thanks Nodge68
|
||
![]() |
|
Nodge68 Member Since: 15 Jul 2020 Location: Newquay Posts: 2082 ![]() ![]() ![]() |
I actually found SDD pretty easy to use, as in programming a new PTM was pretty straightforward, even running all the calibrations was easy. Unfortunately my fault remains, so presumably it's not the PTM.
|
||
![]() |
|
gasman Member Since: 02 May 2013 Location: Tyneside Posts: 900 ![]() ![]() ![]() |
Caution will be the word of the day.
|
||
![]() |
|
Mikey Member Since: 07 Jun 2008 Location: Dundee Posts: 784 ![]() ![]() ![]() |
SDD, in general, is fine to use Ita the cracked software and cloned VCM's you need to be careful with. |
||
![]() |
|
petero Member Since: 27 Jul 2017 Location: Tamworth, Staffs Posts: 49 ![]() ![]() ![]() |
Gasman, a large battery charger is better than nothing - ideally you want something with a smooth voltage of 13-14 volts. If the supply is "noisy" there are concerns that it can corrupt the data during module re-programming.
|
||
![]() |
|
gasman Member Since: 02 May 2013 Location: Tyneside Posts: 900 ![]() ![]() ![]() |
Thanks for the info Petero.
|
||
![]() |
|
Nodge68 Member Since: 15 Jul 2020 Location: Newquay Posts: 2082 ![]() ![]() ![]() |
I found the low battery warning came up pretty quickly. I think I managed 15 minutes or so before the low battery warning came up on the stereo screen.
|
||
![]() |
|
petero Member Since: 27 Jul 2017 Location: Tamworth, Staffs Posts: 49 ![]() ![]() ![]() |
It depends on how quickly you can do what you need to do - as Nodge mentioned, with the ignition on it will be drawing around 10 amps and it won't take long for the battery voltage to dip. SDD will then prevent you from doing much at all. Your battery charger may be sufficient, it all depends how beefy it is ![]() |
||
![]() |
|
gasman Member Since: 02 May 2013 Location: Tyneside Posts: 900 ![]() ![]() ![]() |
Thanks again for the tips.
|
||
![]() |
|
Grue Member Since: 29 Apr 2018 Location: New Zealand Posts: 371 ![]() ![]() ![]() |
How's your sticky turbo doing? Any better after clean? Overboost errors I'm guessing? |
||
![]() |
|
gasman Member Since: 02 May 2013 Location: Tyneside Posts: 900 ![]() ![]() ![]() |
Hi Grue
|
||
![]() |
|
micken Member Since: 11 Jan 2012 Location: West Yorkshire Posts: 50 ![]() ![]() ![]() |
Have you tried the throttle body recalibration yet? |
||
![]() |
|
gasman Member Since: 02 May 2013 Location: Tyneside Posts: 900 ![]() ![]() ![]() |
Hi Micken
|
||
![]() |
|
![]() ![]() |
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
