Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Wheels & Tyres > Delaminating Wheels |
|
|
Aveling Member Since: 24 Mar 2011 Location: Cardiff Posts: 266 |
They will be the 'diamond turned' version with 10 spokes I assume.
|
||
21st Apr 2020 4:46 pm |
|
robert2411 Member Since: 21 Apr 2020 Location: london Posts: 9 |
not sure they are diamond turned if the top coating is coming off see pic |
||
21st Apr 2020 5:06 pm |
|
robert2411 Member Since: 21 Apr 2020 Location: london Posts: 9 |
seen a couple on line that say diamond turned so you are right but why is it powdery underneath ? |
||
21st Apr 2020 6:30 pm |
|
GundogSD4 Member Since: 04 Dec 2019 Location: Wiltshire Posts: 478 |
Corrosion gets under the lacquer. 94 Disco 300 TDI Gone
|
||
21st Apr 2020 8:06 pm |
|
dondiddy Member Since: 16 Apr 2017 Location: Hamilton Posts: 753 |
Your wheels have a protective coat of lacquer that over time can get damaged by stonechips ,road salt etc. This then allows moisture to get behind and it slowly creeps further and further under the lacquer turning it cloudy. The moisture also attacks the alloy of the wheel which turns the top surface of the alloy powdery. You might be able to do a localised repair if the damage is confined to a small area but normally it means getting the whole wheel refurbished which involves putting the wheel in a lathe and removing a small amount from the top surface of the wheel then applying a top coat of lacquer. It is highly likely however within a few months or so that corrosion will start to reappear as diamond cut wheels need constant attention to keep corrosion free. A powder coated wheel is much more durable. |
||
21st Apr 2020 8:19 pm |
|
Boxbrownie Member Since: 17 Mar 2019 Location: Looe Posts: 2053 |
My plain ordinary painted/coated wheels have large areas of bare alloy (or possibly the undercoat) where the paint has flaked off over the years, it looks not too bad as the alloy is almost the same colour as the finishing coat of paint Regards
|
||
21st Apr 2020 8:20 pm |
|
MotionInc Member Since: 17 Jun 2019 Location: North America Posts: 1355 |
You need to get all the loose corroded aluminum off and sand and clean well. I plasti-dipped (5-7 coats each with mat black) some 21 year old rims on a previous vehicle and they lasted a good 4-5 years with just a touch-up spray here and there (sold them to a buddy over a year ago). Just keep wd-40 or Krown rustproofing off the plastidip and you are good to go.......easy peasy. Google vids on Plasti-dip a great product if you are going for functionality over perfection. |
||
21st Apr 2020 9:28 pm |
|
Bobupndown Member Since: 26 Dec 2014 Location: Upside down behind the TV! Posts: 2805 |
Those diamond cut alloys look great when new but quickly degrade if they are not looked after meticulously. I dont have them but a good quality wheel wax regularly applied would help prevent any chips in the lacquer from spreading corrosion. Think I'd be inclined to use them in spring / summer and change to a winter set of wheels for the bad weather? Landrover - turning owners into mechanics since 1948
|
||
22nd Apr 2020 8:22 am |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 5015 |
pics are helpful Jules |
||
23rd Apr 2020 10:22 am |
|
robert2411 Member Since: 21 Apr 2020 Location: london Posts: 9 |
thanks for all your comments i understand now not sure what to do would like to have a go myself but where to start Hmmmm |
||
23rd Apr 2020 11:11 am |
|
Farmer Chalk Member Since: 07 Jul 2016 Location: Sevenoaks Posts: 138 |
I wouldn’t even try..
|
||
24th Apr 2020 7:39 am |
|
robert2411 Member Since: 21 Apr 2020 Location: london Posts: 9 |
thanks i am in harrow so a long way will search around good advice |
||
24th Apr 2020 8:19 am |
|
Farmer Chalk Member Since: 07 Jul 2016 Location: Sevenoaks Posts: 138 |
They collect throughout London as they work with most big car dealers.... |
||
24th Apr 2020 8:42 am |
|
IanMetro Member Since: 11 Sep 2017 Location: Somerset BS21 Posts: 3132 |
Lepsons price seems reasonable if you are planning to keep your car for a long time. Its under half the price of a new set. https://www.rcautomotive.co.uk/webshop/lan...loy-wheel/ On my first FL2, the lacquer failed and I had a similar problem to you, I decided to take out the smallish damaged areas, and polish out the corrosion, finishing the area in clear lacquer. From a normal viewing distance it didn't show, and it stopped any further deterioration. I have paid more attention to cleaning and polishing the wheels on my present Metro, and luckily, they are still undamaged. FL2 XS SD4 Auto 2010 2012-2017 (21k - 91k miles) (MY2011) FL2 Metropolis SD4 Auto 2014 2017- (16k - 77k+ miles) (MY2015) Metro in its 11th Year of (Extended) LR Warranty / Full LR Service History (Expensive, but Trouble/Worry free - hopefully?) |
||
24th Apr 2020 9:08 am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis