I've investigated the headlamp washers which both have failed to work recently and noticed water pouring from the front driver side. Clearly there is a leak/disconnected hose but my question is is there an easy fix to remedy it other than taking the front bumper off? The passenger side also doesn't work but no water is emitted from that side if that helps diagnosis?

If you have fog lamps ? remove the bezel, then the lamp and that should give you access to the washer jets.
Else remove the inner wing plastic guards to access tube.
.

Many thanks I will try that....on previous jobs I found removing the fog-lamp bezel a nightmare...is there a safe way to do it...as they are hardly easy fit/removal items..!

I think the bezel is just a push on pull off fit.

Or 'push on' .....'break as you take off' as I call them!

There is a video about taking the front off an FL2 . Last time I did it, it only took me about 30 minutes so it might be quicker to do that than mess about. 3 x FL1 2 manual + 1 auto
5 x FL2 4 manual + 1 auto
Now Discovery Sport P250 MHEV SE

Many thanks.........