Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Off Topic > Spacesaver wheel advice |
|
|
TooBlue Member Since: 30 Oct 2019 Location: Midlands Posts: 265 |
185/55-17 125/70-15 Difference
|
||
7th Jan 2020 2:39 pm |
|
dorsetfreelander Member Since: 20 Jul 2013 Location: Dorset Posts: 4354 |
Thanks for that and hopefully we won't have to test it I just went and measured the diameters with a tape measure and I got 610mm vs 560mm not scientific I know but only about 9% different. 3 x FL1 2 manual + 1 auto
|
||
7th Jan 2020 2:50 pm |
|
npinks Member Since: 28 Jun 2007 Location: Ls25 Posts: 20090 |
you also need to check the bore size in the middle, not just the nut placement Former Mod/Member, with the most post & Chicken George Arch nemesis |
||
7th Jan 2020 3:15 pm |
|
Largered Member Since: 10 Jul 2016 Location: UK Posts: 1978 |
..... with her bad back, would she be able to replace it at the kerbside ?
|
||
7th Jan 2020 3:30 pm |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 5010 |
I think you should really have a space saver that matches the overall diameter of the original tyre.
|
||
7th Jan 2020 4:41 pm |
|
Bobupndown Member Since: 26 Dec 2014 Location: Upside down behind the TV! Posts: 2805 |
Is the wheel a proper Suzuki part, intended for that model?
|
||
7th Jan 2020 5:52 pm |
|
Lightwater Member Since: 21 Aug 2014 Location: Sydney Northern Beaches Posts: 4906 |
Agree, if you have a flat at the front shift a rear wheel to the front & stick the biscuit on the back. No detours, & drive very carefully straight to the garage! Procrastination, mankind's greatest labour saving device!
|
||
7th Jan 2020 9:49 pm |
|
dorsetfreelander Member Since: 20 Jul 2013 Location: Dorset Posts: 4354 |
Thanks for your comments guys I have done a bit of digging around and the general consensus seems to be that this situation is fairly common and to put it on an undriven wheel ie the back ones in this case and drive straight to a garage. I can however, forsee that all sorts of messages will come up since the wheels are rotating at different speeds.
|
||
7th Jan 2020 11:47 pm |
|
Lightwater Member Since: 21 Aug 2014 Location: Sydney Northern Beaches Posts: 4906 |
Another option & tyre plugs, as long as it's not through a sidewall.
|
||||
8th Jan 2020 1:38 am |
|
Tigger Member Since: 30 Mar 2011 Location: L15KRD Posts: 2555 |
I had no idea that LR had done that! That’s completely unacceptable |
||
8th Jan 2020 6:49 am |
|
dondiddy Member Since: 16 Apr 2017 Location: Hamilton Posts: 753 |
A reduced size or full size spare wheel is still an option on the new DS, It fits under the loadspace floor according to the LR website. |
||
8th Jan 2020 7:38 am |
|
dorsetfreelander Member Since: 20 Jul 2013 Location: Dorset Posts: 4354 |
isn’t that an option at build time only? I was told on the old DS that it costs about £1500 and requires a different exhaust system. 3 x FL1 2 manual + 1 auto
|
||
8th Jan 2020 8:18 am |
|
dondiddy Member Since: 16 Apr 2017 Location: Hamilton Posts: 753 |
Costs £165 for a space saver steel wheel or £560-£760 for a full size alloy spare. The wheel now appears to sit inside the car in the boot floor. No idea if it is the same as the old DS in that the spare wheel could not be added after the car was built. I would have thought that there would be less overheads in having a single floor pan and a reduced number of exhaust options so perhaps that has been taken into account when the new model was designed as the spare wheel set up seemed a bit of an afterthought on the old DS. |
||
8th Jan 2020 8:51 am |
|
Bobupndown Member Since: 26 Dec 2014 Location: Upside down behind the TV! Posts: 2805 |
Not available on 7 seat version I believe. Landrover - turning owners into mechanics since 1948
|
||
8th Jan 2020 9:49 am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis