Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Technical > Oil in Coolant - is it terminal?!.....NO !!!!!!
Post Reply  Down to end
Page 2 of 2 <12
Print this entire topic · 
Steve D



Member Since: 19 Jan 2013
Location: Essexshire
Posts: 4109

United Kingdom 

I used to use washing up liquid with several flushes to get oil out of the cooling system. Oh, and a 3/4 socket set - how big/tight are the nuts then? (I’m assuming that was a typo). Whistle Past: FL2 TD4 HSE Auto
Evoque SD4 Dynamic Lux Auto
Present: Audi A3 S Line.

Post #382285 5th Dec 2019 7:37 pm
View user's profile Send private message View poster's gallery Reply with quote
jules



Member Since: 13 Dec 2007
Location: The Wilds of Warwickshire
Posts: 5021

United Kingdom 2014 Freelander 2 SD4 SE Auto Firenze Red

SJWSW wrote:
UPDATE:
Pleased to report the beloved family Freelander 2 is alive.
Oil cooler the culprit, now successfully changed by an amateur! Workshop manual says go in from below after removing aircon condenser and throttle body, but I went in from above after removing the fuel filter and its huge housing, workshop manual still essential to locate the bolts for everything as you're working blind. Also needed to borrow a 3/4 socket set with extensions/UJ etc to reach the screws on top of the cooler, reconnecting hoses was tricky. Struggled for a while to prime the injectors after putting it all back together, but got there in the end with a cheap hand pump and piece of hose. Then numerous flushes as described which is very time consuming (my drain plug is a pig to get in and out).
Oil and coolant now staying at correct levels, as is temperature. Still some oil appearing in the expansion vessel, not affecting temperature - will flush vessel with petrol again when I get time and run another flush when I service it in the new year.
Thanks for guidance from forum members and a big thanks to whoever posted the workshop manual.
Happy to give advice on the procedure for anyone attempting it for the first time.
Steve


Great news and well done. Thumbs Up Jules

Post #382293 5th Dec 2019 9:53 pm
View user's profile Send private message View poster's gallery Reply with quote
gasman



Member Since: 02 May 2013
Location: Tyneside
Posts: 893

United Kingdom 2009 Freelander 2 TD4_e GS Manual Zermatt Silver

Nice to read of someone having a go regardless of the garages diagnosis and having success. Thumbs Up
Well done that man. Bow down

On the subject of flushing the coolant system, I've used a central heating flushing agent in the past ( Fernox or Sentinal) with success.
But then I would being a Gasman. Thumbs Up Now at the point when I learn something new something old is lost out the other side !
Now retired so it doesn't matter anymore.
Freelander now gone.

Post #382329 6th Dec 2019 4:50 pm
View user's profile Send private message View poster's gallery Reply with quote
bgomesce



Member Since: 04 Dec 2023
Location: fortaleza
Posts: 1

Brazil 2012 Freelander 2 TD4_e SE Auto Indus Silver

Hello from Brazil
had this issue with my FL2 MY 2011, can you recommend any aftermarket brand for the OIL COOLER and GEARBOX OIL COOLER? in Brazil most of the options are Chinese.

thanks

Post #437526 4th Dec 2023 8:14 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 2 of 2 <12
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site