Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Technical > throttle emits high pitched noise followed by a click - NOT |
|
|
DigDil Member Since: 25 Aug 2015 Location: Wiltshire Posts: 73 |
Its the throttle body that makes the noise after the engine is switched off. My car does make the high-pitched noise followed by a click. Any other noise from it is properly bad....not so sure about no noise!.
|
||
26th Nov 2019 2:53 pm |
|
Suckfish Member Since: 28 Feb 2018 Location: Southampton Posts: 215 |
So if I read this right
|
||
26th Nov 2019 3:00 pm |
|
DigDil Member Since: 25 Aug 2015 Location: Wiltshire Posts: 73 |
Thats my understanding although reading some of the old threads there seems to be quite a bit of confusion.
|
||
26th Nov 2019 4:10 pm |
|
dorsetfreelander Member Since: 20 Jul 2013 Location: Dorset Posts: 4354 |
Had a number of FL2s in the family and they all do it. Sometimes goes on for a minute or two. 3 x FL1 2 manual + 1 auto
|
||
26th Nov 2019 4:20 pm |
|
Northcroft Member Since: 29 Jan 2017 Location: Durham Posts: 784 |
so if mine is all silent and that equates to 'stuck open' is there a cheap fix ?? 2017 SEAT Ateca 4drive 2.0 xcellence (May 2022 -
|
||
26th Nov 2019 4:23 pm |
|
dorsetfreelander Member Since: 20 Jul 2013 Location: Dorset Posts: 4354 |
If it was stuck open you wouldn't be able to stop the engine. On a diesel the main purpose of the throttle body is to stop it. 3 x FL1 2 manual + 1 auto
|
||
26th Nov 2019 4:26 pm |
|
Steve D Member Since: 19 Jan 2013 Location: Essexshire Posts: 4109 |
I don't think that’s quite right. The engine will shut down when you switch off and cut the power from the ECU to the injectors. The purpose of the throttle body on FL2's is to help with EGR and to shut the engine down smoothly. Normally when they are poggered, apart from the clicking and crunching, the engine will take a few seconds longer to come to a stop when you switch off. Past: FL2 TD4 HSE Auto
|
||
26th Nov 2019 6:45 pm |
|
Northcroft Member Since: 29 Jan 2017 Location: Durham Posts: 784 |
found this info from another forum : -
|
||
26th Nov 2019 7:50 pm |
|
ROBM Member Since: 11 Sep 2019 Location: OXFORDSHIRE Posts: 20 |
These two videos explain better whether the noise you are experiencing is a fault or normal. The second one shows the faulty one stripped down and why it screams
|
||
27th Nov 2019 8:28 am |
|
sebastian_n7 Member Since: 22 May 2017 Location: London Posts: 29 |
Thank you for the videos, the whole thread is informative. Before replacing the throttle body, I will try the repair kit. This seems to be familiar with Russian forum, just saw this on auction site, no affiliation. https://rover.ebay.com/rover/0/0/0?mpre=ht...3373378175 |
||
19th Dec 2019 1:19 pm |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 5001 |
The throttle body on my 2014 SD4 sometimes "whines" for over 10 minutes followed by a click. Always done it - car runs perfectly. IIRC Our previous TD4's never did it for such long lengths of time though. Jules |
||
19th Dec 2019 8:32 pm |
|
MartynB Member Since: 08 Aug 2011 Location: Currently Rootless ! Posts: 1780 |
New throttle body fitted this weekend . It’s a Pierburg which I’m pretty sure is the OE manufacturer , but it came from Euro Car Parts . The “ whine “ at “ignition off“ is now so quiet it would be easy to think it’s not actually there . Certainly much quieter than it has been recently . The clattering noise it made when it died mid week sounded just like you would expect the actual failure to sound like , which was the moulded gears ragging themselves to death .
|
||
22nd Dec 2019 10:10 pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis