Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > General > i6 . Full tank but only reading 1/2. |
|
|
mike e Member Since: 18 Jan 2011 Location: WALES Posts: 81 |
it is probably the sender ..the pump is for levelling the two halves//on diesel 2007 hse gone
|
||
14th Sep 2019 5:31 pm |
|
RealBeale Member Since: 13 Jun 2016 Location: Birmingham Great Barr Posts: 913 |
Thanks mike e. I've just had it on my icarsoft with the engine running and it's shot up to the near full position. Spent 1/2 an hour or so repeating the start procedure, running diagnostics and checking data and it seems to be where it should be now. Hopefully just a sticky sender, but I'll be keeping a very close eye on it. |
||
14th Sep 2019 6:16 pm |
|
IanMetro Member Since: 11 Sep 2017 Location: Somerset BS21 Posts: 3133 |
This is a common and known fault.
|
||
14th Sep 2019 6:51 pm |
|
Andy131 Member Since: 09 Dec 2009 Location: Manchester Posts: 2184 |
If you have brimmed the car it can't be the in tank fuel pump, this only transfers the fuel for one side to the other and you would always have at least half a tank even if it failed. Actually quite a bit more, they are saddle tanks, but the "link" is quite deep, so think 2/3rd of a tank if the pump fails.
|
||
15th Sep 2019 10:40 pm |
|
guy lewis Member Since: 20 Apr 2014 Location: pembridge Posts: 2 |
Same thing has happened to me. Did a hard reset and so far so good 😊 |
||
4th Feb 2020 10:16 pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis