Hi,

Having seen a few old posts about jack kits, I'm wondering if you still have any available for shipping to Scotland? I've managed to get a full size alloy spare, so now need the jack, wheel brace, and retaining bolt. Trying to replace the "instant mobility kit" that came with the car.

Incidentally, according to the sticker on the back of my car, at some point in the past it came from you guys!

Thanks,

Matthew

Not looking to do Duckworths out of any business, but if you are starting with nothing, you might be better with a generic bottle jack and a decent socket and handle rather than the factory-fitted jack and wheel brace. 2005 D3 2.7 Auto
Previously:
2010 MY FL2 TD4e GS - Now gone at 199,500 miles, about 135,000 of them mine.
‘93 Defender 110 200TDi CSW
‘87 Defender 90 4 cyl Petrol
‘83 110 CSW V8 - best ever!
Range Rover 2-door V8 (not sure of year - 4-speed box and vacuum diff switch)
Series III SWB Diesel

£92.95 for those parts delivered  Sophie Alltoft

Send a paypal payment direct using this link www.paypal.me/duckworthparts

www.duckworthparts.co.uk
Facebook: https://www.facebook.com/duckworthparts/
My Direct Line: 01673 849873
Email: sophie.alltoft@duckworth.co.uk
Supplier of Genuine Land Rover & Jaguar Parts For All Models

Can also supply OEM & Aftermarket parts

A breaker dismantling a Freelander would be my source for this. Landrover - turning owners into mechanics since 1948

2014 Orkney grey Freelander SD4 GS.
2004 Zambezi silver Discovery 2 Td5 (Gone)
1963 Surf blue Morris Mini Minor Super de Luxe (my little toy)

There was one going on here yesterday. If it wasn't so bad it'd be funny.

🐑
Freelander 2 HSE auto 2014 ( Florrie ) ..... Try again.
Freelander 2 GS 2012...... Gone.

Bobupndown wrote:

A breaker dismantling a Freelander would be my source for this.

Worms wrote:

Not looking to do Duckworths out of any business, but if you are starting with nothing, you might be better with a generic bottle jack and a decent socket and handle rather than the factory-fitted jack and wheel brace.

I did consider that, but kept coming back to convenience - the factory jack will secure in place with the retaining bolt, so everything sits nice and secure. If I buy a generic bottle jack etc, I give myself more work concocting something to hold it all in place to stop it rattling around the boot. Plus if I ever come to sell the car it'll look obvious I've been replacing bits. I was lucky enough that the car came with full land rover original mats, boot liner, even key ring (from some company called Duckworth, whoever they are ), I kind of like the idea of keeping parts original.

duckworthparts wrote:

£92.95 for those parts delivered

Dan, thanks very much for the quote. As was mentioned in the thread, someone else has a spare jack going, so I'm making arrangements to get that. Could you re-quote me for just the retaining bolt and wheel brace?

First time speaking to you and I'm being the awkward customer already!

Matthew

You will also need to expanded polystyrene block that holds everything still and goes under the spare wheel.

I will check the postage costs for the jack over the weekend and let you know in a PM. MY13 HSE Lux Santorini Black Gone
MY11 HSE Santorini Black Gone
MY08 SE Blue, Gone
Alfa Romeo GT Gone
Alfa Romeo 156 Space wagon Gone
Volvo V40 Gone
Volvo 480ES Gone
VW Sirocco GTX Gone

My wife's car doesn't have the foam, the jack is just bolted directly to the car, hence my request for the retaining bolt. Does your jack not have a small eyelet welded on to the handle for the bolt to pass through?

Yes it does but the foam is much better at holding everything else still. MY13 HSE Lux Santorini Black Gone
MY11 HSE Santorini Black Gone
MY08 SE Blue, Gone
Alfa Romeo GT Gone
Alfa Romeo 156 Space wagon Gone
Volvo V40 Gone
Volvo 480ES Gone
VW Sirocco GTX Gone

Never had a problem in that regard (in wife's car). The wheel brace clips to the jack, and the trusty elastic band holds it all snug.