Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Technical > freelander 2 cracking
Post Reply  Down to end
Page 2 of 2 <12
Print this entire topic · 
billio



Member Since: 03 Oct 2015
Location: lanarkshire
Posts: 34

United Kingdom 2009 Freelander 2 TD4_e GS Manual Narvik Black

Have you checked wheel tightness? Understeer when you hit the wall with the front of the car.
Oversteer when you hit the wall with the back of the car.
Horsepower how fast you hit the wall.
Torque how far you take the wall with you.

Post #367241 23rd Feb 2019 8:40 pm
View user's profile Send private message View poster's gallery Reply with quote
sova287



Member Since: 30 May 2018
Location: Belusa
Posts: 35

Slovakia 

thanks for advice
sound respectively banging in the second video it finally made a full tank
I do not know whether or not they are float or what,
but after half of the tank has done so much less Thumbs Up

Post #367293 24th Feb 2019 7:32 pm
View user's profile Send private message View poster's gallery Reply with quote
sova287



Member Since: 30 May 2018
Location: Belusa
Posts: 35

Slovakia 

finally problem found it´s steering

video:

on the other side (left) is the will around 1-2 mm


I will have to change the whole steering ????
Thanks for reply

Post #368157 10th Mar 2019 12:24 pm
View user's profile Send private message View poster's gallery Reply with quote
dondiddy



Member Since: 16 Apr 2017
Location: Hamilton
Posts: 753

United Kingdom 2012 Freelander 2 TD4 HSE Manual Firenze Red

Can`t really tell where the play is from the video but both track rod ends and steering arms are available as replacement parts. It might be worth taking off the steering boot and checking the inner knuckle joint on the steering arm as it can be adjusted to remove any play. If it needs replaced then the parts are readily available on the likes of Ebay etc. eBay Item No. 391640164795. Just one of many sellers! good luck!

Post #368159 10th Mar 2019 12:52 pm
View user's profile Send private message View poster's gallery Reply with quote
sova287



Member Since: 30 May 2018
Location: Belusa
Posts: 35

Slovakia 

Thank you for your response
the sound comes from steering and not the wheel, I fear that INNER TIE ROD will not be something insid

but is not it normal to make spinning of it so?

Post #368161 10th Mar 2019 1:01 pm
View user's profile Send private message View poster's gallery Reply with quote
dondiddy



Member Since: 16 Apr 2017
Location: Hamilton
Posts: 753

United Kingdom 2012 Freelander 2 TD4 HSE Manual Firenze Red

To allow for suspension and wheel movement when turning there needs to be a small amount of movement in the inner arm knuckle joint. If the joint is worn or the large nut has come loose then there will be excessive free play which could result in the noise you are experiencing. The knuckle joint sits just underneath the rubber gaiter on the steering rack and is quite accessible once the gaiter has been pulled back. You can then check for movement and adjust it out by slackening the inner nut and adjusting the knuckle joint.

Post #368163 10th Mar 2019 1:14 pm
View user's profile Send private message View poster's gallery Reply with quote
sova287



Member Since: 30 May 2018
Location: Belusa
Posts: 35

Slovakia 

Steering is ok
I changed top mouting damper and cracking still here when is wet or raining only, when is dry so it is quiet,
The most cracinkg is on raining and when I turn left or right actually when car box tilt
Sound coming from right wheel
Thanks for reply Bow down
Edit: it does me already about 30 000 km and sound is still same

Post #373437 12th Jun 2019 6:43 am
View user's profile Send private message View poster's gallery Reply with quote
Boxbrownie



Member Since: 17 Mar 2019
Location: Looe
Posts: 2053

United Kingdom 2007 Freelander 2 i6 HSE Auto Stornoway Grey

Have you checked the steering rack mounts? If they are too soft it could let the rack move too much. Regards

David

Lovely i6 has now gone, but not me......

Please let me know if anything in my post offends you, as I may wish to offend you again......

Post #373441 12th Jun 2019 8:27 am
View user's profile Send private message View poster's gallery Reply with quote
sova287



Member Since: 30 May 2018
Location: Belusa
Posts: 35

Slovakia 

Mechanic told me its OK it would doing all the time No ?
How can i checked it please ?

Post #373446 12th Jun 2019 8:48 am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 2 of 2 <12
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site