Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Maintenance & Modifications > Heavy Steering at low speed and whine from steering pump |
|
|
Yorky Bob Member Since: 28 Apr 2015 Location: Yorkshire Posts: 4561 |
[quote="Arctic" power steering fluid was at the minimum.
|
||
15th Feb 2019 8:25 am |
|
Badger51 Member Since: 01 Mar 2014 Location: Coffs Harbour Posts: 967 |
'The oil from LR is not red so be tad careful of the specification you use'.
|
||
16th Feb 2019 6:21 am |
|
Badger51 Member Since: 01 Mar 2014 Location: Coffs Harbour Posts: 967 |
It's expensive stuff all right, personally I managed with two litres & still had some left over. (Now Sold). 2008 Freelander 2 (Nazca Sand) SE TD4 Auto. Statutory write off & on WOVR for hail damage but still road legal.
|
||
16th Feb 2019 10:24 am |
|
Arctic Member Since: 24 Aug 2016 Location: Westmidlands Posts: 561 |
Thank you guys I have noticed now I can see the leak that the oil looks to be a green colour yet when I purchased the FL2 in March 2017 and I looked into the reservoir took a sample out came a red colour, and have topped up once since purchasing it from minimum to just below maximum, then the other day I topped up using an Halfords make again the same so maybe it as just sat on top of the green fluid ? 1 As above in my other post best place to purchase the green please in more than 1ltr all answers appreciated Arctic PS did a quick search before I go out and investigate this leak, these have come up anyone else used them ? https://www.rmeuropean.com/Products/LR003401-MFG210.aspx https://www.island-4x4.co.uk/power-assiste...36134.html |
||
16th Feb 2019 10:29 am |
|
Past master Member Since: 30 Jun 2010 Location: Isle of Ely Posts: 2710 |
The colour will matter if you have any sort of warranty on the vehicle. I purchased a 3 year old FL2 and when the steering rack died LR at first refused to cover under the warranty as it had red fluid. I pointed out that I had bought it from a dealer with a book stamped up with dealer services. The local LR workshop (JLC) argued my case and got the go-ahead for the work. Ex AA Series III LWB Safari - Gone
|
||
16th Feb 2019 6:36 pm |
|
Arctic Member Since: 24 Aug 2016 Location: Westmidlands Posts: 561 |
Ok so I rang local Jaguar Landrover this morning and asked about the PAS fluid, LR003401 I was informed they have 7 bottles left cost for 1ltr is £11.17, so not that bad really. After coming off the phone I set about finding the leak, FL2 up on ramps. 1 2 Before removing the engine under cover plate, you could see that the oil was mainly on the right of the sub frame. 3 Once removed it gave me a better view 4 The best view was from the rear of the engine looking over the sub frame. 5 Cleaned the leaking area, topped up the reservoir then took a few more photo's from this one you can clearly see it is the rusted pipe that is leaking, going to the steering rack. 6 I then re-fitted the under tray plate as that is not really in the way, drove off the ramps jacked up the drivers side and took off the wheel, this gave you a direct view of the leaking pipe. 7 Cleaned area once again put a white rag over the steering boot, and watched it drip onto it. 8 It seem that I need pressure return hose pipe ( LR029185 ) as anyone else ever seen this or had to do this job ? if so any tips would be great cheers Arctic. |
||
16th Feb 2019 9:05 pm |
|
Badger51 Member Since: 01 Mar 2014 Location: Coffs Harbour Posts: 967 |
Both pipes come as an assy. There is some info in this thread.
|
||
16th Feb 2019 10:30 pm |
|
Arctic Member Since: 24 Aug 2016 Location: Westmidlands Posts: 561 |
Thank you for the link most appreciated, looks like I will need the top half of the pressure pump return hose as well, I am sure a few will be doing this job in the future, due to corrosion of the pipe which I will treat before fitting the new one. |
||
17th Feb 2019 12:22 am |
|
Arctic Member Since: 24 Aug 2016 Location: Westmidlands Posts: 561 |
HI Past master. Yes 100% agree warranty could well be voided if wrong fluid was used, I only added 70ml so hopefully no damaged cause to the power steering pump. Today I found time to go back to Halfords, I spoke to the manager informing him that I was assured the fluid I was given was the right type, by a chap whom said he owned the same car a FL2 diesel. Upon checking he said NO you needed the CHF 202 /CHF 11S I said I had now got to flush the system and it would most likely take a minimum of 2 litre's, he said I wil sort this out for you. He then refunded me my money and also gave me 3 litre's of CHF of there make. so I can flush out the system and renew the fluid once I receive the new reservoir and pressure return pump hose coupling. So yes a big shout out for the Halfords manager.
2 States in the manual below. 3 4 Will post up how the change over go's when I get round to it sometime mid week, good job I have got my R40 M47 diesel Tourer to use in the mean time. 5 |
||||
17th Feb 2019 3:30 pm |
|
Badger51 Member Since: 01 Mar 2014 Location: Coffs Harbour Posts: 967 |
That's a good result at least. Several vids on youtube re changing the reservoir/flushing etc. (Now Sold). 2008 Freelander 2 (Nazca Sand) SE TD4 Auto. Statutory write off & on WOVR for hail damage but still road legal.
|
||
17th Feb 2019 11:13 pm |
|
Arctic Member Since: 24 Aug 2016 Location: Westmidlands Posts: 561 |
Ok So the replacement parts arrived today, I decided to go for the power steering pressure pump top hose also just incase the joint is corroded badly and it will not part with out damage.
|
||
19th Feb 2019 10:32 pm |
|
Yorky Bob Member Since: 28 Apr 2015 Location: Yorkshire Posts: 4561 |
Pipes off and move steering side to side a few times to push out the old crud. For perfection you could do the job, run a while and bleed again. FL2 MY10 TD4 GS traded in at 2 years
|
||
19th Feb 2019 10:38 pm |
|
Arctic Member Since: 24 Aug 2016 Location: Westmidlands Posts: 561 |
. Hi Bob. Thank you for your reply, yes I think I will do as you say pipes off and flush out the old fluid & crud, change over to the new reservoir after or would it be best to follow this video below. What ever I decide to do I will post up how it went including photo's cheers guys most appreciated for all suggestion & help |
||
19th Feb 2019 11:39 pm |
|
Badger51 Member Since: 01 Mar 2014 Location: Coffs Harbour Posts: 967 |
Yes, as YB has said change pipes first (you'll probably lose most of the old fluid then), then flush & bleed as per the video. Thats's how I did it, using the old reservoir to collect the fluid. Of course you'll also be using the correct fluid, not like the guy in the video!
|
||
20th Feb 2019 2:51 am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis