![]() |
|
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > Maintenance & Modifications > HB3 headlight bulb conversion; halogen to LED? |
![]() ![]() |
|
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 5165 ![]() ![]() ![]() |
As described in the video above - the poor beam is probably because your LEDs are not emitting light from the same point as the OEM bulb filament. The LED has to be designed with its diode/s as near to centre of the long axis of the unit as possible in order to mimic the halogen filament - a few mm away will make quite a difference to where the light is focused by the reflectors. Jules |
||
![]() |
|
ReggiePerrin Member Since: 13 Mar 2013 Location: Derbyshire Posts: 1279 ![]() ![]() ![]() |
I hadn't spotted that... a US supplier...https://www.roverjaguarparts.com/oem-parts...p-lr081691. Will allow you to add the part to the basket... not cheap though and this company will not ship internationally. It suggests that the thing is not totally extinct though. Couldn't these parts be made up by somebody with a bit of electronics nous and appropriate connectors? |
||
![]() |
|
JulesK Member Since: 07 Dec 2014 Location: Ceredigion. Posts: 1664 ![]() ![]() ![]() |
|
||
![]() |
|
LR NUT Member Since: 12 May 2012 Location: Scotland Posts: 4350 ![]() ![]() ![]() |
|
||
![]() |
|
ReggiePerrin Member Since: 13 Mar 2013 Location: Derbyshire Posts: 1279 ![]() ![]() ![]() |
If a four year old car is accident damaged then, it possibly can't be repaired to its original pre-accident condition because the car is 'obsolete' and parts are no longer available?
|
||
![]() |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 5165 ![]() ![]() ![]() |
How complicated is it to upgrade a MY14 car with halogens to HID ? What about the self-levelling? Jules |
||
![]() |
|
LR NUT Member Since: 12 May 2012 Location: Scotland Posts: 4350 ![]() ![]() ![]() |
You need to have the CCF enabled to take Xenons I got Mikey to do mine took literally a few minutes if that. JLR themselves don’t have access to edit the CCF for Xenons but most good Indy’s will. Install new lights the harness and wiring is all the same therefore it’s a plug and played . The self levelling will not work but you can still manually adjust the lights via the dash scroller and there is adjustments on the actual headlight itself.
|
||
![]() |
|
JulesK Member Since: 07 Dec 2014 Location: Ceredigion. Posts: 1664 ![]() ![]() ![]() |
Well not everyone's in the position to fork out for new headlamps and as for being obsolete, we are in a bad place if a bit of wire is obsolete. If it wasn't so bad it'd be funny. 🐑 Freelander 2 HSE auto 2014 ( Florrie ) ..... Try again. Freelander 2 GS 2012...... Gone. |
||
![]() |
|
JulesK Member Since: 07 Dec 2014 Location: Ceredigion. Posts: 1664 ![]() ![]() ![]() |
Agreed ![]() 🐑 Freelander 2 HSE auto 2014 ( Florrie ) ..... Try again. Freelander 2 GS 2012...... Gone. |
||
![]() |
|
dondiddy Member Since: 16 Apr 2017 Location: Hamilton Posts: 753 ![]() ![]() ![]() |
Not sure why people are getting worked up about "obsolete parts" that were intended for a specific Vin range only and their car has already had the fix! |
||
![]() |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 5165 ![]() ![]() ![]() |
I thought HID lights needed to be self-levelling to be legal, but Ive read through MOT documents and it seems manual levelling will do. https://www.gov.uk/government/uploads/syst...-draft.pdf You are definitely not allowed to put HID bulbs in halogen light units - with good reason. Jules |
||
![]() |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 5165 ![]() ![]() ![]() |
Our MY14 seems to have the same problem as the cars which were offered the "resistor fix", yet its VIN is not on the list of applicable vehicles. Not getting worked up but simply seeking to improve things because: Im on my 4th set of bulbs. But also : The trouble with only having one bulb for main and dipped is that you lose everything on that side when it blows. The coverage and brightness is not as good as our previous FL2 which had twin halogens bulbs. Jules |
||
![]() |
|
JulesK Member Since: 07 Dec 2014 Location: Ceredigion. Posts: 1664 ![]() ![]() ![]() |
Jules as I live out in the sticks I have noticed a huge difference with the lamps I had fitted which is in a earlier post in this thread but the original lamps were way to yellow in the lanes and as you say when one goes you are knackered. |
||
![]() |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 5165 ![]() ![]() ![]() |
Another HB3 blew last night. |
||
![]() |
|
![]() ![]() |
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
![](../images/layout/footer/disclaimer.gif)