Not something I'd think worth doing for myself........ as even wind up windows would suit me.

But an absolute stunning job, well done.  FL2 now gone and have a couple of items left for sale:-

Brodit active iPhone holder + Brodit dash clip,
Bluetooth Music Streaming Module.

Largered wrote:

... as opposed to the buy-it and bolt-it-on crew.

.

Final job to complete this project was the connection to the illumination circuit for the driver tailgate release switch.
JLR p’n LR040338, same as rear tailgate.
Switch gear illumination is supplied from pinout 32 in plug C3BP01G at the CJB but it easier to just take your feed from any feed into an illuminated switch, as I did as it’s all interconnected.



 MY15
Tyre Pressure Monitoring System (TPMS)
Surround Camera System
InControl Apps soon to be replaced with CarPlay (WIP)
Meridian Premium Surround Sound
Digital Audio Broadcast
Timed Climate
Cruise ECO Data
Follow Me Home Reverse
Extra Features Menu
Picture In Motion
4x4i screen (WIP)
Digital Broadcast TV
Meridian Rear Media with WIFI
Factory Powered Tailgate
Blind Spot Monitoring (BSM)
Reverse Cross Traffic Alert (RCTA)
Electrochromatic Wing Mirrors (WIP)

Last edited by Stuartc on 2nd Jan 2019 11:23 am. Edited 2 times in total

Looks like there is just enough room to fit the ejector seat button! But I would not illuminate that one as it may attract unwanted attention! Procrastination, mankind's greatest labour saving device!

Acoustic insulation ARB TPMS 3xARB air compressors After cooler Air tank On-board OCD pressure air/water cleaning Additional 50L fuel Carpet in doors ABE 2x1kg Waeco 28L modified fridge Battery 4x26ah Solar 120w Victron MPPT 100/20 DC-DC 18amps 175amp jumper plug Awning 6x255/60R18

would that switch not have been better positioned where the dash lights rotary wheel is ? I'm guessing that having the switch there would be susceptible to getting hit with your feet as you get in and out (or is that just me with my monster feet ?)

For me this was the most logical spot.
1. Tailgate is disabled when doors locked and when I go to get out I can press the button and by the time I’m
At the rear of vehicle the tailgate has opened.
2. If I change my mind on position I can simply replace that small panel and you’d never know it was there.
3. There’s no way of making the switch look integrated in the position you’ve mentioned. It’s actually a module and the switch is pretty bulky. MY15
Tyre Pressure Monitoring System (TPMS)
Surround Camera System
InControl Apps soon to be replaced with CarPlay (WIP)
Meridian Premium Surround Sound
Digital Audio Broadcast
Timed Climate
Cruise ECO Data
Follow Me Home Reverse
Extra Features Menu
Picture In Motion
4x4i screen (WIP)
Digital Broadcast TV
Meridian Rear Media with WIFI
Factory Powered Tailgate
Blind Spot Monitoring (BSM)
Reverse Cross Traffic Alert (RCTA)
Electrochromatic Wing Mirrors (WIP)

I think the boot switch location is good. I keep a spirit Level in the space next to the lights rotary dial as I don't bother putting in the car romote key fob in this location. Procrastination, mankind's greatest labour saving device!

Acoustic insulation ARB TPMS 3xARB air compressors After cooler Air tank On-board OCD pressure air/water cleaning Additional 50L fuel Carpet in doors ABE 2x1kg Waeco 28L modified fridge Battery 4x26ah Solar 120w Victron MPPT 100/20 DC-DC 18amps 175amp jumper plug Awning 6x255/60R18

Stuartc wrote:

For me this was the most logical spot.
1. Tailgate is disabled when doors locked and when I go to get out I can press the button and by the time I’m
At the rear of vehicle the tailgate has opened.
2. If I change my mind on position I can simply replace that small panel and you’d never know it was there.
3. There’s no way of making the switch look integrated in the position you’ve mentioned. It’s actually a module and the switch is pretty bulky.

I considered that also and even though it’s a “plug and play” affair the housing dimensions are different. MY15
Tyre Pressure Monitoring System (TPMS)
Surround Camera System
InControl Apps soon to be replaced with CarPlay (WIP)
Meridian Premium Surround Sound
Digital Audio Broadcast
Timed Climate
Cruise ECO Data
Follow Me Home Reverse
Extra Features Menu
Picture In Motion
4x4i screen (WIP)
Digital Broadcast TV
Meridian Rear Media with WIFI
Factory Powered Tailgate
Blind Spot Monitoring (BSM)
Reverse Cross Traffic Alert (RCTA)
Electrochromatic Wing Mirrors (WIP)

Finally I got it work. Thank you so much for your help. I used a piggy fuse to connect to FB6 position. I'm very happy. Just have another question. when it close it not close completely do i need to adjust anything else to fix that?

Also I haven't mount this part

Click image to enlarge

Yes, that’s what pulls the tailgate to it’s closed position. MY15
Tyre Pressure Monitoring System (TPMS)
Surround Camera System
InControl Apps soon to be replaced with CarPlay (WIP)
Meridian Premium Surround Sound
Digital Audio Broadcast
Timed Climate
Cruise ECO Data
Follow Me Home Reverse
Extra Features Menu
Picture In Motion
4x4i screen (WIP)
Digital Broadcast TV
Meridian Rear Media with WIFI
Factory Powered Tailgate
Blind Spot Monitoring (BSM)
Reverse Cross Traffic Alert (RCTA)
Electrochromatic Wing Mirrors (WIP)