Hi, so full story, my FL2 went into my local for a basic little service, filters etc......now she didn't get used much straight after this but then she did have a longish run which also meant sitting in loads of traffic. Just as i was getting home she felt like she misfired a bit and the power was a bit shot at low revs.
Over my next few short drives this seemed worse, mostly noticeable at low/slow pull aways, foot down not noticeable at all.
Took her into my local to be hooked up, had a few messages that were cleared, took for a test drive and she came back with error code P0045-19.
Now my guy has been over it for the last couple of days but can't find anything.
Have seen a couple of times the mention of a new fuel filter being fitted, what is the relevance of this, if any, think a user oldgezza mentioned it before....
Otherwise any other thoughts???

Is this similar
http://www.freel2.com/forum/topic7502.html

Try searching the code on forum. FL2 XS SD4 Auto 2010 2012-2017 (21k - 91k miles) (MY2011)
FL2 Metropolis SD4 Auto 2014 2017- (16k - 79k+ miles) (MY2015)
Metro in its 11th Year of (Extended) LR Warranty / Full LR Service History
(Expensive, but Trouble/Worry free - hopefully?)

I think you may find this thread to be an interesting (or worrying) read...http://www.freel2.com/forum/topic16502.html

The issue seems to affect both manual and automatic cars of all ages. Different owners may be feeling different judders/shudders, so presumably there are different causes...???

I believe P0045-19 is 'turbocharger actuator power stage output 1 circuit overload' - or the code may also be logged by a weak battery. Currently enjoying:
2011 Freelander 2 TD4 XS (SOLD)
2013 BMW X3 20D M-Sport Auto
2007 Jaguar XK 4.2 Coupe

http://www.freel2.com/forum/land-rover-cus...-vf31.html FL2 XS SD4 Auto 2010 2012-2017 (21k - 91k miles) (MY2011)
FL2 Metropolis SD4 Auto 2014 2017- (16k - 79k+ miles) (MY2015)
Metro in its 11th Year of (Extended) LR Warranty / Full LR Service History
(Expensive, but Trouble/Worry free - hopefully?)

Skyguy, thanks for responding, it seems the thread you have referred to seems to be more relevant to newer models, 2011 onwards and none of them have quoted the the same error codes as mine....

Ianmetro, battery could be an option to look at, seems to have been mentioned by a couple of people, does seem a bit strange but running out of ideas and money to spend on this girl.....

Screen grab frm yesterday

Click image to enlarge

Ok, so unplugged the MAF sensor and she drives like a dream, no issues at all........go out buy a new sensor and fit it and she drives like she did before, lurching all over the place in low gears........

So what next??? Wiring loom???? or could it be something else??

Anyone???

I am going to get the garage to fit a new wiring loom from the MAF and possibly a new battery, really money i don't have when none of these are assured fixes...

Anyone got any ideas, got this motor down to medical issues and now spending my bucket list money to try and keep her on the road, not even goin to be able to sell or part exchange with this one issue she has.......if the loom doesn't work she is basically scrap......