I am thinking of the above mod for my 59 plate hse.i have found one thats the right colour in pretty good condition and seems a reasonable price.i know from posts on the forum that existing fogs and sensors can be used.
the sensor bracket roughly under the center left of the number plate is missing,it looks to be a small oblong plastic box with a hole in the middle,i guess for the sensor to fit into,are these detatchable/can I remove the one from my existing bumper ?
anyone have any thoughts please?
cheers
sandy gone
P38 v8 auto no problems,great howle from exhausts when giving it welly
Td5 auto head gasket,no5 pot not uncommon but good car.
1st Tdv6s manual epb problem fixed under warranty(stealer said"never heard of this before,i suggested he looked at d3 forum.
2nd Tdv6 se auto epb
3rd Tdv6 xs auto 2008,swmbo,s favourite.

Don't know - here's a pic of the back of my facelift bumper which may be of ahelp to you

Click image to enlarge

hi westville
that gives a better idea of the back with all the gubbins installed.i see that under the rh fog is the angled pdc unit, and to the left following the pdc wire looks like the one below the no plate,i cant zoom in enough to get a clear look at the holder,but I guess that if they are not removeable or available from lr parts,i could make one from plastic and araldite it in place.did your pdc,s just clip in?.
thanks very much for the pic,very much appreciated.
cheers
sandy
I may pop up to my local stealers parts dept,and get them to have a look on their computer at a diagram of the fitting. gone
P38 v8 auto no problems,great howle from exhausts when giving it welly
Td5 auto head gasket,no5 pot not uncommon but good car.
1st Tdv6s manual epb problem fixed under warranty(stealer said"never heard of this before,i suggested he looked at d3 forum.
2nd Tdv6 se auto epb
3rd Tdv6 xs auto 2008,swmbo,s favourite.

Yes you can take them off your old bumper, they are plastic welded on and can be eased off using something flat between mount and bumper then stuck on your new one, I'm in the process of doing this and bought a facelift bumper without sensors, the positions are marked on the back so I've drilled the holes and taken the mounts off a scrap bumper and sprayed them ready to put on.

Click image to enlarge

thanks MJT
thats great,thanks for the pics.
i was watching a youtube vid by powerfull uk landrover bits on removing and refitting the bumpers,does not look too bad.
when will yours be ready to fit.?
 gone
P38 v8 auto no problems,great howle from exhausts when giving it welly
Td5 auto head gasket,no5 pot not uncommon but good car.
1st Tdv6s manual epb problem fixed under warranty(stealer said"never heard of this before,i suggested he looked at d3 forum.
2nd Tdv6 se auto epb
3rd Tdv6 xs auto 2008,swmbo,s favourite.

It'll be waiting for better weather and the bathroom finishing first. 2007 TD4 XS Manual in Sumatra Black

RNLI Man, Is this what you are looking for ??

https://www.ebay.co.uk/itm/NEW-Bracket-par...SwRQxaccQ7


Good Luck