Hi,

does anybody know this site?
https://tema4x4.ru/catalog/prostavki_opor_...retan.html

they have a ebay too but freelander spacers are not avaliable https://www.ebay.com/usr/tema4x4

it looks like they have a poliuretan spacer for FR2 and I think about buy and try it. 30 mm set on front and rear will be ok? https://www.instagram.com/halotuswiat/

No but less than £28
Might give them a try ?? 2008 xs
Snorkel
raised axle/gearbox breathers
Mantec tank guard
Cb radio
Blanked EGR
Sump guard
Scratches
Snolkle

This is a company based in Russia, so this cause a very low price. I don't know what is a quality of this spacers but ebay comments looks good. https://www.instagram.com/halotuswiat/

They look more like solid nylon than polyurethane which in my opinion is a good thing - At the money maybe worth a go......

After a wad of research at the time I made my front spacers 20mm to avoid too much strain on the front drivetrain and any possiblity of the front driveshaft contacting the front subframe which other people had experienced with spacers 25mm+. I made the rears 25mm for an extra few mm ground clearance for the fuel tank but 20mm would be fine here too I think.

Also worth considering how you are going to secure the rear strut tops to body as the original strut bolts are welded to the strut top mount but are too short with any spacers fitted. The fronts are easier as you can get to both sides of the securing nut and bolt but only the top side is accessible at the rear struts.

Sounds good possibility though!

Thank you for your input
Rear bolts sound a bit of hassle 🙈😂 2008 xs
Snorkel
raised axle/gearbox breathers
Mantec tank guard
Cb radio
Blanked EGR
Sump guard
Scratches
Snolkle

Trekfinder produce a springs that will give +30 mm https://shop.trekfinder.de/Hoeherlegungsfe...Millimeter but price is too much for me  https://www.instagram.com/halotuswiat/

Ok I was talk with my mechanic and I order a set of this spacers. I will keep inform when it will arrive  https://www.instagram.com/halotuswiat/

Sounds good!

What size of spacer are you going for on the front and are you going for the same size for the rear?

I took both 30 mm. We will see how it will be fit I hope that the trekfinder is selling +30mm springs the spacers will be fit too. Next step will be 245/70 R17 Cooper sst maxx and almost finish Only front lightguard left on my mod list. https://www.instagram.com/halotuswiat/

Yesterday I recive my order... unbox and hmmm price is low but quality is discussing...

take a look:

Click image to enlarge

Click image to enlarge

Yup they don't look so good really on first impression.......

The rear spacers in your picture look out of shape as they should be an exact circle and with the steel sleeves in the front spacers and bubbles in the rear spacers makes me wonder if these spacers are made more from a polyurethane rubber material rather than a solid nylon or aluminium material which is really what you want?

How solid / hard are the spacers themselves?

You could use them as templates & get a local plastics engineering shop make some new ones out of the correct plastic. Procrastination, mankind's greatest labour saving device!

Acoustic insulation ARB TPMS 3xARB air compressors After cooler Air tank On-board OCD pressure air/water cleaning Additional 50L fuel Carpet in doors ABE 2x1kg Waeco 28L modified fridge Battery 4x26ah Solar 120w Victron MPPT 100/20 DC-DC 18amps 175amp jumper plug Awning 6x255/60R18

Given these spacers don't look the most consistent shape in the pics then if you wanted to go down the Engineering Shop route then I think I would be much more tempted to get your engineering shop to make up a set of spacers from the same drawings that I got mine made up from which forum member MihaiB sent to me a few years ago.

The Engineering Drawings for the front and rear spacers are in this previous thread ;

http://www.freel2.com/forum/topic21462.html

I downloaded this images with dimensions of spacers. I have to search some company who do this for me in Poland. https://www.instagram.com/halotuswiat/

If you are going to the trouble of pulling the car apart. Probably better to put some taller springs in.

0.75 inch rear lift springs: https://www.carid.com/arb/0-75-ome-rear-li...rl=1115559 Procrastination, mankind's greatest labour saving device!

Acoustic insulation ARB TPMS 3xARB air compressors After cooler Air tank On-board OCD pressure air/water cleaning Additional 50L fuel Carpet in doors ABE 2x1kg Waeco 28L modified fridge Battery 4x26ah Solar 120w Victron MPPT 100/20 DC-DC 18amps 175amp jumper plug Awning 6x255/60R18