![]() |
|
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > My Freelander 2 > Nuts' Dynamic MY14 |
![]() ![]() |
|
|
pcheaven Member Since: 19 Jan 2010 Location: Kent Posts: 1459 ![]() ![]() |
xenon upgrade is very easy, though you will need the CCF file editing to tell it you have xenons, otherwise they will eithe r flicker or not work at all.
|
||
![]() |
|
Jim1988 Member Since: 04 Mar 2016 Location: Derbyshire Posts: 30 ![]() ![]() ![]() |
I'm hitting the search function at the minute but can't seem to find a thread on someone doing it start to finish, don't suppose someone can point me in the right direction, really wanted them when purchasing, and wasn't aware they could be retro fitted! This is good news |
||
![]() |
|
Jim1988 Member Since: 04 Mar 2016 Location: Derbyshire Posts: 30 ![]() ![]() ![]() |
I have a 61 reg, but I would like the newer day light ones fitted if possible, would Not want to cut my wings or anything of course |
||
![]() |
|
RogB Member Since: 16 Dec 2014 Location: Mansfield Posts: 3882 ![]() ![]() ![]() |
there is no cutting involved, the lights are a straight physical swap over. the only difference is the type/shape of the block connector but if you buy lights second hand just make sure they have the connector still attached and then just cut your old connector off and solder the wires together. Don't think the colour coding even changed so its a simple job (apparently |
||
![]() |
|
Jim1988 Member Since: 04 Mar 2016 Location: Derbyshire Posts: 30 ![]() ![]() ![]() |
Haha well me and solder don't mix, so I'll get a proper car electric man do it! But it's my first ""mod"" that's going to be done. Cheers guys |
||
![]() |
|
LR NUT Member Since: 12 May 2012 Location: Scotland Posts: 4350 ![]() ![]() ![]() |
Well I’ve not updated my thread on here in a while. After 4 years to the day today I finally got to play hide n seek! Car handled brilliantly. I did get out to check the bodykit as some parts had a large amount of snow hiding the ruts. I didn’t realise that I had parked the car on a sheet of ice covered in snow. When I got back in to drive away the wheels were just spinning. I then switched the terrain response to grass, gravel & snow took the traction control off accelerated hard and the car found traction and pulled away.
|
||||||||||||
![]() |
|
Largered Member Since: 10 Jul 2016 Location: UK Posts: 1978 ![]() |
|
||
![]() |
|
LR NUT Member Since: 12 May 2012 Location: Scotland Posts: 4350 ![]() ![]() ![]() |
Well today after 4 years pondering |
||||||||
![]() |
|
LR NUT Member Since: 12 May 2012 Location: Scotland Posts: 4350 ![]() ![]() ![]() |
Well I got the gear knob back today and it’s something I should have done when I got the gear surround and sat nav tray console painted 4 years back |
||||||||||||||||||
![]() |
|
![]() ![]() |
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
![](../images/layout/footer/disclaimer.gif)