Poate nu am vazut eu pe forum, dar poate sa imi zica cineva cum se face resetarea indicatorului de service?

La mine a fost resetat cu un tester care nu e dedicat pentru land rover.

http://www.freel2.com/forum/topic4963.html

Oil Service Reset is a little different to the normal service reset (at least in my MY11).

This works for me
Am gasit si aceasta metoda si la mine aceasta metoda functioneaza,este simpla .....
Oil Service Reset

found this on another site and it was the same procedure I used. took more like 1 min to reset rather than the 15 seconds for this guy

To switch off the service light in your MK6 or MK7 Transit: (worked for FL2 MY11 TD4)

1. Service it
2. Switch on ignition but don't start engine
3. Press Down Brake pedal and Throttle pedal fully, and hold till service light flashes this may take up to a minute, but usually about 15 seconds
4. Switch off igniton

Job Done